 |
 |
| View previous topic :: View next topic |
| Author |
Message |
jrugar
Joined: 14 May 2012
Posts: 3
|
| problem with sequence running [solved] |
 Posted: Mon May 14, 2012 7:07 pm |
 |
|
I am having a problem getting this code to work to run the sequence as I have it loading. I am trying to flash 8 leds on port b of a pic16f628. I have had it working other ways but wanted to make the c code smaller.
| Code: |
#include <16F628A.h>
#fuses INTRC_IO,NOPROTECT,NOWDT,PUT,NOMCLR
#use delay(clock=4000000)
#use standard_io(b)
#byte port_b = 6
char rom led_tab[] = {0x00,0xFF,0x00,0xFF,0x00,0xFF,0xFF,0x00,
0x7F,0xBF,0xDF,0xEF,0xF7,0xFB,0xFD,0xFE,
0x7F,0xBF,0xDF,0xEF,0xF7,0xFB,0xFD,0xFE,
0x7F,0xBF,0xDF,0xEF,0xF7,0xFB,0xFD,0xFE,
0x7F,0xBF,0xDF,0xEF,0xF7,0xFB,0xFD,0xFE,
0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F,
0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F,
0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F,
0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F,
0x7E,0xFF,0x7E,0xFF,0x7E,0xFF,0x7E,0xFF,
0xBD,0xFF,0xBD,0xFF,0xBD,0xFF,0xBD,0xFF,
0xDB,0xFF,0xDB,0xFF,0xDB,0xFF,0xDB,0xFF,
0xE7,0xFF,0xE7,0xFF,0xE7,0xFF,0xE7,0xFF,
0xE7,0xFF,0xE7,0xFF,0xE7,0xFF,0xE7,0xFF,
0xDB,0xFF,0xDB,0xFF,0xDB,0xFF,0xDB,0xFF,
0xBD,0xFF,0xBD,0xFF,0xBD,0xFF,0xBD,0xFF,
0x7E,0xFF,0x7E,0xFF,0x7E,0xFF,0x7E,0xFF};
void main(void)
{
set_TRIS_B(0x00); /* set port_b to be outputs */
PORTB = 0; /* initialize All port_b outputs to be zero */
while( TRUE )
{
/* forever loop using WHILE construct */
char i;
for(i=0; i<136; i++)
{
PORTB = led_tab[i];
delay_ms(100);
}
}
}
|
when i run the above code in proteus all it does is all 8 leds light up and stay lit .and when i wrote it to the pic and tested it it does the same in hardware as well. |
|
 |
jrugar
Joined: 14 May 2012
Posts: 3
|
|
| Posted: Mon May 14, 2012 7:19 pm |
|
|
| Got it fixed after posting changed from char rom to char const and fixed my portb it should be port_b issue in the main code. |
|
|
jrugar
Joined: 14 May 2012
Posts: 3
|
| New Version of Code |
| Posted: Tue May 15, 2012 1:24 am |
|
|
Use this code to help learn and make better things from it i am giving this version to the public to have fun with and learn.
| Code: |
/******************************************************************************
* (c)2012 Joe Rugar *
* Pic16f628a LED sequence flasher v1.0 *
* *
* This program is free software: you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation, either version 3 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program. If not, see <http://www.gnu.org/licenses/>. *
******************************************************************************/
#include <16F628A.h>
#fuses INTRC_IO,NOPROTECT,NOWDT,PUT,NOMCLR
#use delay(clock=4000000)
#use standard_io(b)
#byte port_b = 6
char const led_tab[] = {0b00000000,0b11111111,0b00000000,0b11111111,0b00000000,0b11111111,0b00000000,0b11111111,
0b00000001,0b00000010,0b00000100,0b00001000,0b00010000,0b00100000,0b01000000,0b10000000,
0b00000001,0b00000010,0b00000100,0b00001000,0b00010000,0b00100000,0b01000000,0b10000000,
0b10000000,0b01000000,0b00100000,0b00010000,0b00001000,0b00000100,0b00000010,0b00000001,
0b10000000,0b01000000,0b00100000,0b00010000,0b00001000,0b00000100,0b00000010,0b00000001,
0b10000001,0b11000011,0b11100111,0b11111111,0b11111111,0b11100111,0b11000011,0b10000001,
0b00011000,0b00111100,0b01111110,0b11111111,0b11111111,0b01111110,0b00111100,0b00011000,
0b10011001,0b01100110,0b10011001,0b01100110,0b10011001,0b01100110,0b10011001,0b01100110,
0b11001100,0b00110011,0b11001100,0b00110011,0b00110011,0b11001100,0b00110011,0b11001100,
0b11001100,0b00110011,0b11001100,0b00110011,0b00110011,0b11001100,0b00110011,0b11001100,
0b11000011,0b00111100,0b00111100,0b11000011,0b00111100,0b11000011,0b11000011,0b00111100,
0b11000011,0b00111100,0b00111100,0b11000011,0b00111100,0b11000011,0b11000011,0b00111100};
void seq1(void);
void seq2(void);
void seq3(void);
void seq4(void);
void seq5(void);
void main(void)
{
set_TRIS_B(0x00); /* set port_b to be outputs */
port_b = 0; /* initialize All port_b outputs to be zero */
while( TRUE )
{
/* forever loop using WHILE construct */
seq1();
delay_ms(1000);
seq2();
delay_ms(1000);
seq3();
delay_ms(1000);
seq4();
delay_ms(1000);
seq5();
}
}
void seq1(void)
{
char i;
for(i=0; i<96; i++)
{
port_b = led_tab[i];
delay_ms(50);
}
}
void seq2(void)
{
char i;
for(i=0; i<96; i++)
{
port_b = led_tab[i];
delay_ms(100);
}
}
void seq3(void)
{
char i;
for(i=0; i<96; i++)
{
port_b = led_tab[i];
delay_ms(70);
}
}
void seq4(void)
{
char i;
for(i=0; i<96; i++)
{
port_b = led_tab[i];
delay_ms(80);
}
}
void seq5(void)
{
char i;
for(i=0; i<96; i++)
{
port_b = led_tab[i];
delay_ms(30);
}
} |
|
|
|
dyeatman
Joined: 06 Sep 2003
Posts: 1934
Location: Norman, OK
|
|
| Posted: Tue May 15, 2012 5:40 am |
|
|
Thanks Joe! I am sure it will be beneficial to some of the folks here and
future visitors. Maybe a copy could be put in the Code Library?
_________________
Google and Forum Search are some of your best tools!!!! |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
