CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Himax/HX8312A

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Guest
Himax/HX8312A
PostPosted: Mon Mar 13, 2006 9:19 am     Reply with quote
Does anybody knows if CCS has support for this controller ?
Guest
Guest
PostPosted: Tue Mar 21, 2006 2:28 am     Reply with quote
Can someone please help / point me where can i get infos regarding software LCD control for this controller LSI : HX8312-A

THANK YOU !
rberek



Joined: 10 Jan 2005
Posts: 207
Location: Ottawa, Canada

View user's profile Send private message

PostPosted: Tue Mar 21, 2006 8:24 am     Reply with quote
There is very little about this controller on the web. I found this document which references it.

http://www.edtc.com/EDT/Products/Specs/348.pdf

All, I know is that it has both an SPI and CPU interface. For more than that, I suggest you contact Himax directly.
Guest
PostPosted: Tue Mar 21, 2006 11:34 am     Reply with quote
Thank you rberek !
I dont know where you find this infos :-) but now i have some bacis idea how this works...

Quote:
All, I know is that it has both an SPI and CPU interface.

Hmm. then there should be no problem, controling it thru CCS ?

Maybe with some changed version of GLCD ?
rberek



Joined: 10 Jan 2005
Posts: 207
Location: Ottawa, Canada

View user's profile Send private message

PostPosted: Tue Mar 21, 2006 12:04 pm     Reply with quote
Quote:
I dont know where you find this infos :-)


Google...

Well, there should be no problem COMMUNICATING with it. I think you'd still need more info on how to control it. Without more details on the command/data sequences that the control expects, I couldn't say how hard it is to control it. Himax should be able to give you some info.

And if CCS doesn't have a driver for it, write your own and put it in the code library!

Good Luck..
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group