| View previous topic :: View next topic |
| Author |
Message |
glenjoy
Joined: 18 Oct 2004
Posts: 21
|
| kbd.c problem |
 Posted: Sat Jan 19, 2008 8:57 am |
 |
|
How to connect the 4x3 keypad to a pic using the kbd.c, the code does not say which i/o is for the column or for the row.
Thanks. |
|
 |
dyeatman
Joined: 06 Sep 2003
Posts: 1934
Location: Norman, OK
|
|
| Posted: Sat Jan 19, 2008 9:08 am |
|
|
Search the forum for kbd.c and you will find many posts on the subject asking the same question you are.
It is best to do a little re(search) in this forum before asking a question. A lot of questions have been asked (and answered) many times before. It saves a lot of time for everyone (including you) because reading the threads will gives you a wealth of information beyond just the connections. This way folks on the board don't end up answering the inevitable followup questions that have already been addressed. |
|
|
glenjoy
Joined: 18 Oct 2004
Posts: 21
|
|
| Posted: Sat Jan 19, 2008 9:13 am |
|
|
| dyeatman wrote: | Search the forum for kbd.c and you will find many posts on the subject asking the same question you are.
It is best to do a little re(search) in this forum before asking a question. A lot of questions have been asked (and answered) many times before. It saves a lot of time for everyone (including you) because reading the threads will gives you a wealth of information beyond just the connections. This way folks on the board don't end up answering the inevitable followup questions that have already been addressed. |
Searched them and no answer regarding connections. |
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
|
glenjoy
Joined: 18 Oct 2004
Posts: 21
|
|
| Posted: Sat Jan 19, 2008 8:52 pm |
|
|
How to choose from black or blue keypad?
I am trying to simulate in proteus but no luck. |
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Sat Jan 19, 2008 9:21 pm |
|
|
| I don't want to work on Proteus problems. |
|
|
ayman
Guest
|
| help |
| Posted: Tue Aug 04, 2009 11:03 am |
|
|
| I need a 4*4 kbd library in c language in c compiler. |
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Tue Aug 04, 2009 5:22 pm |
|
|
Please use the forum's search page:
http://www.ccsinfo.com/forum/search.php
Type this in the top box:
In the Search Options/ Forum box, set it to search this forum:
You will get 8 hits.
The first hit has a link to a 4x4 keypad driver. |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
