CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
18F87J50 Registers..

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
18F87J50 Registers..
PostPosted: Sat Nov 10, 2007 3:31 pm     Reply with quote
Well it look like the 4550 and this chip are a little different in the way they need to accesss the registers for some USB stuff. In the data sheet for this chip it says that "addresses F40 through F5F are not part of the Access Bank. therfore specifying a BSR should be used to access these registers". I am not sure how to so this . Any help would be greatly appreciated.. Thanx
Guest
PostPosted: Sat Nov 10, 2007 4:44 pm     Reply with quote
Got it.. Did not have to do anythinghere.. On the 4550 the PLL turns itself on . On the 87j50 you have to set it on manually. Yeh.. TTY
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group