problem with port D

[Oscar]

I need to work with port D to send a information to beams of but my I cosay for some reason does not do it, please help me. I leave this I cosay them apparently here very simple to catch and to off the port but does not do it, Thanks reason why can do and if they can place again I cosay improved serious fantastic...



#include <18F4620.h>
#device adc=8
#use delay(clock=20000000)
#fuses NOWDT,WDT128,HS, NOPROTECT, IESO, BROWNOUT, BORV21, NOPUT, NOCPD, NOSTVREN, NODEBUG, NOLVP, NOWRT, NOWRTD, NOEBTR, NOCPB, NOEBTRB, NOWRTC, NOWRTB, NOFCMEN, NOXINST, NOPBADEN, NOLPT1OSC, NOMCLR

#define output_d





void main()
{

setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_psp(PSP_DISABLED);

setup_spi(FALSE);

setup_wdt(WDT_OFF);
setup_timer_0(RTCC_INTERNAL);
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);

setup_comparator(NC_NC_NC_NC);
setup_vref(FALSE);


while (1)
{
delay_ms(500);
output_d(0x00);
delay_ms(500);
output_d(0xff);

}




}

[PCM programmer]

[Oscar]

I did it but still I have errors, is not sufficient. I continue having problems

[PCM programmer]

I deleted that line and compiled your program with no errors.
I did this with the PCH compiler, version 3.245.

[Oscar]

Excuse which happens is that I have Plug-in of Mplab and when I suppress this line presents/displays errors to me, and I have version 3,203 of the CCS and also gives errors me. Please help me with this...