CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Timer0 and WDT

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Marionco
Guest
Timer0 and WDT
PostPosted: Tue Nov 29, 2005 8:18 pm     Reply with quote
Hi guys.
I am using a 18F4620 and CCS 3.235.
Can I use Timer 0 (I´m using if for making a time base of aprox 1sec) and use the watchdog timer as to avoid any hangup, both at the same time ?
Any help will be appreciated.

Marionco.
drolleman
Guest
PostPosted: Tue Nov 29, 2005 11:21 pm     Reply with quote
yes the wdt is separate from the timer0 the only time the wdt fires, is if it times out. timer 0 is for your use as a second counter will work fine
Guest
PostPosted: Wed Nov 30, 2005 5:29 pm     Reply with quote
Thanks a lot, drolleman.

MARIONCO.-
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group