LCD.C problem

[Kevin Benedict]

Usind LCD.C and getting error

Error[28] C:\PROJECTS\F84FANSW\LCD.C 139 : Expecting an identifier

Which is the first line of

void lcd_putc( char c) {
switch (c) {
case '\f' : lcd_send_byte(0,1);
delay_ms(2);
break;
case '\n' : lcd_gotoxy(1,2); break;
case '\b' : lcd_send_byte(0,0x10); break;
default : lcd_send_byte(1,c); break;
}
Any suggestions ?
___________________________
This message was ported from CCS's old forum
Original Post ID: 144515087

[PCM programmer]

:=Usind LCD.C and getting error
:=
:=Error[28] C:\PROJECTS\F84FANSW\LCD.C 139 : Expecting an identifier
:=
:=Which is the first line of
:=
:=void lcd_putc( char c) {
------------------------------------------------------------

Can you tell us:

1. The name and version of your compiler.

2. The part number of the PIC you are using.

To try and duplicate your problem, I can compile the CCS
example, EX_LCDKB.C, which uses the LCD.C file. Do you
get that error when you compile that example file ?
I just need to verify that, before I test it.
___________________________
This message was ported from CCS's old forum
Original Post ID: 144515088

[Kevin Benedict]

Dumb mistake on my part, I was using some borrowed code and
C was define as the carry flag bit in another include file,
so the compiler did not like "lcd_putc( char c)"
I have corrected the #define statement.
Thanks for the help !

:=:=Usind LCD.C and getting error
:=:=
:=:=Error[28] C:\PROJECTS\F84FANSW\LCD.C 139 : Expecting an identifier
:=:=
:=:=Which is the first line of
:=:=
:=:=void lcd_putc( char c) {
:=------------------------------------------------------------
:=
:=Can you tell us:
:=
:=1. The name and version of your compiler.
:=
:=2. The part number of the PIC you are using.
:=
:=To try and duplicate your problem, I can compile the CCS
:=example, EX_LCDKB.C, which uses the LCD.C file. Do you
:=get that error when you compile that example file ?
:=I just need to verify that, before I test it.
___________________________
This message was ported from CCS's old forum
Original Post ID: 144515099