CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
can pic16f877 interface with usb alone?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Catwater
Guest
can pic16f877 interface with usb alone?
PostPosted: Wed Oct 26, 2005 4:21 am     Reply with quote
can i interface my 16f877 to usb by it self?

what is the different between usb chip and non usb chip ????
asmallri



Joined: 12 Aug 2004
Posts: 1635
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Wed Oct 26, 2005 5:42 am     Reply with quote
USB has a relatively complex stack. USB implementations using the PIC offload the processing. Thic can be done using an embedded USB peripheral in the PIC (such as the PIC18F4550) or by using a stand alone USB controller (such as the FTDI controllers). If you want to use a 16F877 class processor then you need to use an FTDI type controller.
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Catwater
Guest
PostPosted: Wed Oct 26, 2005 10:10 pm     Reply with quote
thank alot asmallri. you clear the problem that i find the way out for a week. thank again Razz
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group