CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
one further newbie question

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
newmember
Guest
one further newbie question
PostPosted: Wed Mar 02, 2005 12:03 pm     Reply with quote
Let us assume that I have two running interrupts - one for the serial port (RX) and one for Timer1. What happens if an interrupt occurs on the serial port and the serial port interrupt routine is running and then Timer1 issues an interrupt (non of the interrupts "fast"). Will the Timer1 interrupt routine start right after the RX interrupt routine is finished - or is an interrupt skipped that occurs during the time another interruot routine is running ?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed Mar 02, 2005 12:26 pm     Reply with quote
Quote:
What happens if an interrupt occurs on the serial port and the serial port
interrupt routine is running and then Timer1 issues an interrupt

See this post for a discussion of that topic:
http://www.ccsinfo.com/forum/viewtopic.php?t=18491
newmember
Guest
PostPosted: Wed Mar 02, 2005 12:33 pm     Reply with quote
thank you !
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group