View previous topic :: View next topic |
Author |
Message |
Einly
Joined: 10 Sep 2003 Posts: 60
|
PIC10, 14 and 17 series enquiry? |
Posted: Sat Jan 22, 2005 9:31 pm |
|
|
Hi, May I know:
1. Which series/model of PIC support 16bit counter?
2. PIC10, PIC14 and PIC17 series instuction is how many bit? Because
use manual only shows 12, 16 and 18 series. Not including 10, 14 and 17. Are these 3 series new/old? Any special on them?
Thanks a lot!
Regards: Einly, _________________ Einly |
|
![](templates/subSilver/images/spacer.gif) |
Mark
Joined: 07 Sep 2003 Posts: 2838 Location: Atlanta, GA
|
|
Posted: Sat Jan 22, 2005 9:57 pm |
|
|
You can always refer to the mircochip website for information about the chips. The 10's are new the other 2 are old. They also have DSPICs which are a hybrid between a DSP and a microcontroller. In the future, you will find a version of the DSPIC without the DSP functionality, yes a 16bit microcontroller from Microchip. |
|
![](templates/subSilver/images/spacer.gif) |
Einly
Joined: 10 Sep 2003 Posts: 60
|
instruction length? |
Posted: Sun Jan 23, 2005 12:28 am |
|
|
As from the manual, 12 series is baseline category, 16 series is midrange and 18 series is a high end series.
So, 10, 14 and 17 belongs to which category? How many bits of each instruction length?
Wait for your reply...
REgards: Einly, _________________ Einly |
|
![](templates/subSilver/images/spacer.gif) |
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
![](templates/subSilver/images/spacer.gif) |
|