CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Internal Error

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Dreyliciouss



Joined: 17 Jan 2011
Posts: 1

View user's profile Send private message

Internal Error
PostPosted: Mon Jan 17, 2011 1:44 am     Reply with quote
Hi everyone,

I have a problem when I try to compile any code with MPLAB and I have this error :

"Executing: "C:\Program Files (x86)\PICC\Ccsc.exe" "main.c" +FM +DF +LN +T -A +M +Z +Y=9 +EA
>>> Warning 203 "C:\Users\hureauau\Desktop\Logiciel\main.c" Line 69(1,1): Condition always TRUE
--- Info 300 "C:\Users\hureauau\Desktop\Logiciel\main.c" Line 72(1,2): More info: * Unable to write to main.PJT
*** Error 44 "C:\Users\hureauau\Desktop\Logiciel\main.c" Line 72(1,2): Internal Error - Contact CCS OUTPUT FILE P
1 Errors, 1 Warnings.
Halting build on first failure as requested.
BUILD FAILED: Mon Jan 17 08:34:34 2011"

I tried to compile a simple code which is this one:

Code:
#include <18F452.h>
#fuses XT,NOWDT,PUT,BROWNOUT,NOLVP
#use delay(clock=4000000)

//==============================
void main(void)
{

while(1);
}


I have the same error.

Here is my code :

Code:
/**
 * @file main.c
 *
 * Fichier principal de gestion de la ceinture de réveil
 *
 *  @version 1.0
 *  @date    04/01/2011
 *  @author Audrey HUREAU
 *
 *    Modifié le 14/01/2011
 */

#include <12f683.h>
#include <stdlib.h>
#include <stdio.h>

#fuses INTRC_IO,NOBROWNOUT,NOMCLR,NOWDT,PROTECT,PUT,NOCPD,NOIESO,NOFCMEN,HS
#use delay(clock=8000000) //8MHz

/* Variables */
unsigned int arret=0;
float adc_value[6];
int i=0;

/* Fonction d'initialisation */
void init(void)
{
   setup_oscillator(OSC_8MHZ); // select 8MHz internal clock   
   set_tris_a(0b00011011); // GP0,1,2 et 3 sont des entrées
   setup_comparator(NC_NC);// On utilise pas de comparateur
   setup_vref(FALSE);//On a pas besion de préciser la tension de ref utile au comparateur
   setup_adc(ADC_CLOCK_INTERNAL);//Select ADC conversion clock
   setup_adc_ports( AN3_ANALOG );//Seul GP4(AN3) est un port analogue
   set_adc_channel(3);//sélection du channel AN3
   delay_us(10);// Petit temps de délai après
   output_low(PIN_A5);// Diode éteinte à la base
   output_a(0b0000000);// 0 en sortie si pas d'arret respiratoire
}

/* Le module Detect() permet de scruter la sortie
de la jauge pendant un intervalle de temps */
void Detect(void)
{
   //SLEEP();
   do{      
      read_adc(ADC_START_ONLY);// Lecture de la valeur
      adc_value[i] =read_adc(ADC_READ_ONLY);
      if((adc_value[i]==adc_value[i-1]) && (adc_value[i]==adc_value[i-2]) && (adc_value[i]==adc_value[i-3])){
      //on test si la valeur lue est égaleaux précédentes
         arret=1;
      }
      else
      //sinon on incrémente le i pour scruter plus lgt
         i=i+1;
   delay_ms(1000); /* On relève les valeurs toutes les secondes */
   }while(arret==0); // On scrute tant qu'on a pas détecté d'arrêt
   
}

/* Fonction principale*/
void main(void)
{
   init();
   do{
       Detect(); // appel à la fonction de détection pour commencer à scruter
      setup_adc(ADC_OFF);
      output_a(0b0000001); //Envoyer signal d'alarme à l'émetteur à la sortie du micro
      output_high(PIN_A5); //Allumer la diode
   }while(1);
}


Can anyone help me with the compiler? Do you think it can be a problem in my code?
Thank you.
Mike Walne



Joined: 19 Feb 2004
Posts: 1785
Location: Boston Spa UK

View user's profile Send private message

Internal Error
PostPosted: Mon Jan 17, 2011 4:51 pm     Reply with quote
Hi,

Have you set the build options correctly?

I tried your simple "while (1) ;" code and got the Internal Error message and the others.

I then went into build options and set the MPASM option in place of the default CCS one.

Code then compiled without errors.

Mike
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Jan 17, 2011 5:19 pm     Reply with quote
But what compiler version ? For you or him ?
temtronic



Joined: 01 Jul 2010
Posts: 9163
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Mon Jan 17, 2011 9:37 pm     Reply with quote
Also what version of MPLAB !! v8.63 (latest) has an 'interesting' bug.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group