CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
icd-u64 rev 3 firmware

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
overmindx



Joined: 06 Oct 2008
Posts: 43

View user's profile Send private message

icd-u64 rev 3 firmware
PostPosted: Tue May 06, 2014 9:19 pm     Reply with quote
Hi,
I have created a bootloader which is based on ex_bootloader. Everything is working great. I am able to use my bootloader to download firmware codes to my chips.
Recently, we purchased a couple of rev 3 icd-u64 which has a firmware version of 2.96. Now when i used this to put my bootloader to the chip. I was still able to use it to download the firmware code using the bootloader however, the interrupts are not working anymore.
Moreover, when I upgrade my rev.2 icd-u64 to firmware 2.96, it suffers the same fate. So i have to downgrade it again to 2.91. I tried to downgrade my rev3 icd's but it cant detect the lower firmware versions.
My question is has anyone successfully tried to use the ex_bootloader and used the interrupts on the firmware code using rev3 icd's? if so, can you share it with me?
Thanks

bryan
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group