CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Upgrading PicStart Plus

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
JFK
Guest







Upgrading PicStart Plus
PostPosted: Mon Jan 24, 2005 9:12 am     Reply with quote

Hi

Just starting New Project using PIC16F818 and MPlab tells me I need to update the firmware for my PicStart Plus. Is this the only change thats going to be needed to program the flash devicices or will I have to do anything else after updating the firmware?

TIA

JFK
Konrad



Joined: 15 Sep 2003
Posts: 34

View user's profile Send private message

PICStart upgrade
PostPosted: Mon Jan 24, 2005 4:30 pm     Reply with quote

Upgrading the firmware should suffice

Note that Microchip provide an upgrade kit for older PICStarts, which comprises of a PIC18 board to replace the older PIC17 chip.
For support of some devices I had to install the kit.
The PIC18 board has a bootloder for updating firmware.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group