CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
need a forums about protel dxp

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
nader



Joined: 29 Aug 2004
Posts: 12

View user's profile Send private message Send e-mail

need a forums about protel dxp
PostPosted: Fri Dec 24, 2004 7:29 am     Reply with quote
hi guys
i have problem for converting my schematic to pcb in protel dxp.(it didn't draw some the net).if there is any forums about it please tell me.
thanks.
Humberto



Joined: 08 Sep 2003
Posts: 1215
Location: Buenos Aires, La Reina del Plata

View user's profile Send private message

PostPosted: Fri Dec 24, 2004 8:12 am     Reply with quote
Quote:

if there is any forums about it please tell me.


www.forum.allaboutcircuits.com/index.php?showtopic=1108
www.eng-tips.com/threadminder.cfm?pid=999
www.techservinc.com/protelusers/forumrules.html

Best wishes,

Humberto
Guest
PostPosted: Fri Dec 24, 2004 8:20 am     Reply with quote
I made a mistake in the first link:

www.forum.allaboutcircuits.com/index.php?showtopic=1108


Try this.

forum.allaboutcircuits.com/index.php?showtopic=1108


Humberto Very Happy
treitmey



Joined: 23 Jan 2004
Posts: 1094
Location: Appleton,WI USA

View user's profile Send private message Visit poster's website

PostPosted: Mon Dec 27, 2004 9:08 am     Reply with quote
Just a "shot in the dark".

In PCB view make sure your links are updated.


PCB view. Project,.... Links...



If these are right.. the schematic should be like PCB..

If not.. in the schematic view try update PCB
and verifly updates and proform updates.

tjr
adrian



Joined: 08 Sep 2003
Posts: 92
Location: Glasgow, UK

View user's profile Send private message

Re: need a forums about protel dxp
PostPosted: Tue Dec 28, 2004 6:36 am     Reply with quote
nader wrote:
hi guys
i have problem for converting my schematic to pcb in protel dxp.(it didn't draw some the net).


I use Protell 99SE, so the following may be slightly different on the DXP version.

One cause of this is using 'PlaceLine' from the drawing tools toolbar, instead of 'PlaceWire' from the wiring tools toolbar. 'PlaceWire' creates a net, whilst 'PlaceLine' does not.

By default, the PlaceWire creates a black line, whilst PlaceLine creates a blue line - although these default colours can be changed.

Quote:
if there is any forums about it please tell me.
thanks.


Have you tried the protel website? Their technical FAQ's have proved very useful in the past.
Testicky



Joined: 22 Nov 2003
Posts: 12
Location: South Africa / Taiwan

View user's profile Send private message Send e-mail Visit poster's website

Register for DXP forum
PostPosted: Mon Jan 03, 2005 5:04 am     Reply with quote
Register on http://forums.altium.com for DXP issues.
This forum is much alive and helpfull for all your DXP
questions / answers.
_________________
Testicky
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group