CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Update the firmware for the ICD-64?

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
ORF2_RME



Joined: 04 Mar 2024
Posts: 1

View user's profile Send private message

Update the firmware for the ICD-64?
PostPosted: Mon Mar 04, 2024 9:00 pm     Reply with quote
I'm using CCS Device Programmer. When I select the target chip and file to load on my device I get "The firmware in the programming tool does not support this target chip; please update the firmware on tool and select firmware that is compatible." I've downloaded the accompanying usb drivers .exe. Thank you!
jeremiah



Joined: 20 Jul 2010
Posts: 1351

View user's profile Send private message

PostPosted: Wed Mar 06, 2024 8:45 am     Reply with quote
There is a tab in the CCSLOAD application called diagnostics. It has utilities for updating the firmware on your ICD. You can either pull one from the web or a local file (usually supplied by CCS support so you would need to contact them for this if you want a local copy).
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group