CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

Write EEPROM

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
art



Joined: 21 May 2015
Posts: 181

View user's profile Send private message

Write EEPROM
PostPosted: Sun May 28, 2017 11:40 pm     Reply with quote

Hi

I would like to write an eeprom starting from address 00 to 0B, but
I found out, only address 00 until 03 were written into the eeprom.
How to make it write all this 12 addresses ?

Here is my code.
Code:

#include <18F4550.h>
#DEVICE ADC=10
#fuses HSPLL,NOWDT,PROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN       
#use delay(clock=48000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7,ERRORS)

#include <string.h>
#include <input.c>
#include <stdio.h>
#include <stdlib.h>
#include <usb_cdc.h>
#include "24256.c"


void read_string_eeprom(char *buffer, int16 start_addr, int8 no_chars)
{
   int8 count;
   for (count=0;count<no_chars;count++)
      {
        buffer[count]=read_ext_eeprom(start_addr++);
      }
      buffer[count]='\0';



 
void main()
   {
      char c;
      int8 i  ;         
      unsigned char d;     
      unsigned char key;       
      int8 buffer[100];
      char m="A";     
      char n="Z";
      char o="S";
      char p="K";   
   
                                         

   usb_init_cs();
   


   while (TRUE)
         {
         usb_task();


            if (usb_cdc_kbhit())
               {
                 c=usb_cdc_getc();
                 if (c=='\n') {putc('\r'); putc('\n');}
                 if (c=='\r') {putc('\r'); putc('\n');}

                                       

                 while(true)
                 
                     {
                  ART:

                  d = usb_cdc_getc();


                         if(d=='W')   // push A
                             {
                                while (key!=32) // push SPACE BAR to stop
                                   {

                                 if(usb_cdc_kbhit())
                                   {key=usb_cdc_getc();}

                                       
                                       {
                                         
                                             init_ext_eeprom();
                                                                                   
                                              printf(usb_cdc_putc, "\n");
                                             
                                             for(i = 0; i<3; i=i+4)
                                                {
                                                write_ext_eeprom(i, m);
                                                write_ext_eeprom(i+1, n);
                                                write_ext_eeprom(i+2, o);
                                                write_ext_eeprom(i+3,p);           
                                                }
                                                                                                                                                       
                                               
                                             for(i = 0; i < 12; i=i+4 )   
                                               {
                                                read_string_eeprom(buffer, i, 4);
                                                printf(usb_cdc_putc,buffer);
                                                printf(usb_cdc_putc,"\r");   
                                               }                                       
                                     
                                       }         

                                   } key=0; // to initialize 'key' not as SPACE BAR
                             }

                     }
               }       
         }             
}                     

alan



Joined: 12 Nov 2012
Posts: 357
Location: South Africa

View user's profile Send private message

PostPosted: Mon May 29, 2017 12:21 am     Reply with quote

When do you think this will exit the for loop:
Code:
for(i = 0; i<3; i=i+4)

Try
Code:
for(i = 0; i<12; i=i+4)


Regards
art



Joined: 21 May 2015
Posts: 181

View user's profile Send private message

PostPosted: Mon May 29, 2017 12:52 am     Reply with quote

Hi alan,
Thanks it work!


Last edited by art on Mon May 29, 2017 1:00 am; edited 1 time in total
alan



Joined: 12 Nov 2012
Posts: 357
Location: South Africa

View user's profile Send private message

PostPosted: Mon May 29, 2017 12:55 am     Reply with quote

You really think so?

for starts with i=0;
next round i=0+4 thus i= 4. Is this less than 3 or not?
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group