CCS :: View topic - How to Name a Pin

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

How to Name a Pin

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

sobinstn

Joined: 02 Mar 2017
Posts: 6
Location: Kochi

How to Name a Pin
Posted: Thu Mar 02, 2017 1:12 pm

How do I name a pin in PIC ccs compiler? Example name RB0 to Enable, so that I can use enable=1 for high and enable =0 for low?

jeremiah

Joined: 20 Jul 2010
Posts: 1344

Posted: Thu Mar 02, 2017 3:55 pm

Reply with quote

Usually in CCS you would use the following paradigm:

Code:

#define ENABLE PIN_A7

...

output_low(ENABLE);
...
output_high(ENABLE);
...
output_toggle(ENABLE);

...etc.

You can go:

Code:

#byte PORTB = <address or getenv() call>
#bit ENABLE = PORTB.0

...

ENABLE = 1;

But that is usually more hackish and used to work around bugs or unsupported functionality.

sobinstn

Joined: 02 Mar 2017
Posts: 6
Location: Kochi

Thank you.. This is working..

Posted: Fri Mar 03, 2017 12:12 am

Reply with quote

jeremiah wrote:

Usually in CCS you would use the following paradigm:

Code:

#define ENABLE PIN_A7

...

output_low(ENABLE);
...
output_high(ENABLE);
...
output_toggle(ENABLE);

...etc.

You can go:

Code:

#byte PORTB = <address or getenv() call>
#bit ENABLE = PORTB.0

...

ENABLE = 1;

But that is usually more hackish and used to work around bugs or unsupported functionality.

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group