CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

nRF24L01+ full driver by Eduardo Guilherme Brandt
Goto page Previous  1, 2, 3 ... 17, 18, 19, 20  Next
 
Post new topic   Reply to topic    CCS Forum Index -> Code Library
View previous topic :: View next topic  
Author Message
dmendesf



Joined: 31 Dec 2005
Posts: 32

View user's profile Send private message

PostPosted: Wed May 11, 2016 10:22 pm     Reply with quote

Thank you for your answer. I already found these websites (and others) talking about the differences between these clones. All of them use Arduino code to talk to them. I use this code with ccs and the most common clone and it works ok. The other ones doesn't seem to work no matter what I change trying to bypass their flaws, so i wanted to know if someone succeeded.
Eduardo__



Joined: 23 Nov 2011
Posts: 197
Location: Brazil

View user's profile Send private message

PostPosted: Thu May 12, 2016 5:55 am     Reply with quote

Uau, It is really not good! Some of people that posted here can be using fake nRFs. Some code can not work!

;(
_________________
Eduardo Guilherme Brandt
dmendesf



Joined: 31 Dec 2005
Posts: 32

View user's profile Send private message

PostPosted: Thu May 12, 2016 6:05 am     Reply with quote

Hi Eduardo, fellow brazilian here from Rio de Janeiro. Sorry for the mistypings in the last messages but I was using a cell phone with typing corrections for portuguese, so it was a bit hard to type right Smile

Here's some more investigative work trying to discover what's inside the blob:

https://forum.mysensors.org/topic/1664/which-are-the-best-nrf24l01-modules/201

The most strange ones are these:

http://robohaat.com/br/home/340-dip-nrf24l01-wireless-data-transmission-module.html

I have some of them... couldn't even make them oscillate, let alone talk with each other :D
Eduardo__



Joined: 23 Nov 2011
Posts: 197
Location: Brazil

View user's profile Send private message

PostPosted: Thu May 12, 2016 6:41 am     Reply with quote

Thanks dmendesf and all of others answers.
It is really good to see it here ;)
_________________
Eduardo Guilherme Brandt
40inD



Joined: 30 Jul 2007
Posts: 112
Location: Moscow, Russia

View user's profile Send private message

PostPosted: Fri Sep 09, 2016 5:54 am     Reply with quote

Eduardo,
Code:

int RF24_comm(int comm, int32 comm1, int commDS) {   //commDS=datasize(1 to 32 bits)
   int rv;                             //rv=return value(SPI nRF24 status read value)
   RF24_select();       
   RF24_xfer(comm);                    //RF24 Write address/command(see RF24_addr addresses list tabble in .h file)
   rv=spi_xfer(RF24_SPI, comm1, commDS);//Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER
   rv=spi_read2();                     //It?s necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;                    //Return last read value
}

rises error "Expression must evaluate to a constant" for commDS
Eduardo__



Joined: 23 Nov 2011
Posts: 197
Location: Brazil

View user's profile Send private message

PostPosted: Fri Sep 09, 2016 6:52 am     Reply with quote

Probably the problem is the version of the compiler.

The code worked originally in CCS version 4.124 or similar.
_________________
Eduardo Guilherme Brandt
chico_pic



Joined: 21 Sep 2012
Posts: 10

View user's profile Send private message

PostPosted: Fri Oct 14, 2016 9:05 pm     Reply with quote

Can someone help me, I want use pic16F1455.
I have this error
Code:

 rv=spi_xfer(RF24_SPI, comm1, commDS);//Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER

*** Error 27: Expression must evaluate to a constant

and for other one is:
Code:
TX_BUFFER_FULL    =0b00000001    //(R)(0)TX FIFO full flag. 1: TX FIFO full. 0: Available locations in TX FIFO.

*** Error 31: Identifier is already used in this scope

I use ccs 5.061


I change this
Code:
//********** DEFINE PORT NAMES
#define  SPI_MISO       PIN_C2   //SPI(Usar por hardware quando possivel)
#define  SPI_MOSI       PIN_C1   //SPI(Usar por hardware quando possivel)
#define  SPI_CLK        PIN_C0   //SPI(Usar por hardware quando possivel)

//Driver nRF24L01P.C
#define  RF24_IRQ       PIN_A4   //interrupcao nRF24L01+
#define  RF24_CS        PIN_C4   //chipselect nRF24L01+
#define  RF24_CE        PIN_C3   //chipEnable nRF24L01+
#define  RF24_PERFORMANCE_MODE   //performance mode ON
#define  RF24_SPI       NRF_SPI  //Redirects SPI2 port to RS24_SPI stream
Eduardo__



Joined: 23 Nov 2011
Posts: 197
Location: Brazil

View user's profile Send private message

PostPosted: Mon Oct 17, 2016 11:29 am     Reply with quote

Have you seen the example file, at the top of this topic?
_________________
Eduardo Guilherme Brandt
zidged



Joined: 23 Nov 2012
Posts: 3

View user's profile Send private message

PostPosted: Wed Feb 01, 2017 11:55 am     Reply with quote

Dear Eduardo,

This is first signalling which generated from RF24_default_config() function.
As you can see some clocks are missing. I don't understand what is wrong. I am waiting for your reply as soon as possible.



I changed this function to check something.
Code:

int RF24_comm(int comm, int32 comm1, int commDS) { 
 //commDS=datasize(1 to 32 bits)
   int rv;   //rv=return value(SPI nRF24 status read value)
   RF24_select();       
   RF24_xfer(comm);  //RF24 Write address/command(see RF24_addr addresses list table in .h file)
   rv=spi_xfer(RF24_SPI, comm1, commDS); //Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER.
   rv=spi_read2();   //It´s necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;   //Return last read value
}

I am getting:
Quote:
"Expression must evaluate to a constant" message cause that " rv=spi_xfer(RF24_SPI, comm1, commDS); "

error message for "commDS".
I think this argument is the third byte of configuration parameters.
zidged



Joined: 23 Nov 2012
Posts: 3

View user's profile Send private message

PostPosted: Thu Feb 02, 2017 11:12 am     Reply with quote

zidged wrote:
Dear Eduardo,

This is first signalling which generated from RF24_default_config() function.
As you can see some clocks are missing. I don't understand what is wrong. I am waiting for your reply as soon as possible.



I changed this function to check something.
Code:

int RF24_comm(int comm, int32 comm1, int commDS) { 
 //commDS=datasize(1 to 32 bits)
   int rv;   //rv=return value(SPI nRF24 status read value)
   RF24_select();       
   RF24_xfer(comm);  //RF24 Write address/command(see RF24_addr addresses list table in .h file)
   rv=spi_xfer(RF24_SPI, comm1, commDS); //Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER.
   rv=spi_read2();   //It´s necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;   //Return last read value
}

I am getting:
Quote:
"Expression must evaluate to a constant" message cause that " rv=spi_xfer(RF24_SPI, comm1, commDS); "

error message for "commDS".
I think this argument is the third byte of configuration parameters.


i changed SPI configuration to Force_SW and done.
zidged



Joined: 23 Nov 2012
Posts: 3

View user's profile Send private message

PostPosted: Thu Feb 02, 2017 11:13 am     Reply with quote

40inD wrote:
Eduardo,
Code:

int RF24_comm(int comm, int32 comm1, int commDS) {   //commDS=datasize(1 to 32 bits)
   int rv;                             //rv=return value(SPI nRF24 status read value)
   RF24_select();       
   RF24_xfer(comm);                    //RF24 Write address/command(see RF24_addr addresses list tabble in .h file)
   rv=spi_xfer(RF24_SPI, comm1, commDS);//Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER
   rv=spi_read2();                     //It?s necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;                    //Return last read value
}

rises error "Expression must evaluate to a constant" for commDS


Change force_hw to force_sw!
Eduardo__



Joined: 23 Nov 2011
Posts: 197
Location: Brazil

View user's profile Send private message

PostPosted: Thu Feb 02, 2017 11:21 am     Reply with quote

zidged wrote:
Dear Eduardo,

This is first signalling which generated from RF24_default_config() function.
As you can see some clocks are missing. I don't understand what is wrong. I am waiting for your reply as soon as possible.


i changed SPI configuration to Force_SW and done.



But you lose performance using software SPI.
About the error given, check if you enabled passing strings from the RAM to the compiler, as shown below:

Code:
#device PASS_STRINGS=IN_RAM 


//It must be put in the beginning of the program.

Good luck friend!
_________________
Eduardo Guilherme Brandt
inservi



Joined: 13 May 2007
Posts: 128

View user's profile Send private message

Great Thank-you
PostPosted: Tue Mar 14, 2017 2:46 am     Reply with quote

Great job, Thank-you :-)
_________________
in médio virtus
sebcar



Joined: 03 May 2017
Posts: 8

View user's profile Send private message

Problem with PIC16LF88
PostPosted: Wed May 03, 2017 5:35 am     Reply with quote

Dear Eduardo,
First, thank you for driver. However, it has been a long time since i have programed on PIC, and i did not manage to compile.

First I give my scheme:

[img]https://goo.gl/photos/4XMjeoEfiauCHvBMA[/img]

I use a PIC 16LF88, the internal oscillator at 4 MHz, ICSP and 3.3V PIC.
I program on CCS v 5.008.
Secondly I have this code:

.h File
Code:

#include <16F88.h>
#DEVICE *=16    ICD=TRUE  PASS_STRINGS=IN_RAM
#device ADC=10

#FUSES NOWDT                    //No Watch Dog Timer
#FUSES PUT                      //Power Up Timer
#FUSES NOBROWNOUT               //No brownout reset
#FUSES NOLVP                    //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O

#use delay(internal=4MHz)
#use STANDARD_IO( A )
#use FIXED_IO( A_outputs=PIN_A2,PIN_A1 )


The .c file:
Code:

#include <Domotique Pic.h>
//#USE SPI (MASTER, SPI1, ENABLE=PIN_B3, MODE=0, BITS=8, STREAM=RF24_SPI)
//#USE SPI(FORCE_SW , DI=PIN_B1, DO=PIN_B2, CLK=PIN_B4,ENABLE=PIN_B3, MASTER, MODE=0, BITS=8, MSB_FIRST, STREAM=STREAM_SPI)
#USE SPI(FORCE_SW, SPI2, MASTER, BAUD=1000000, MODE=0, BITS=8, MSB_FIRST, STREAM=STREAM_SPI2)

#define BatMes    PIN_A0
#define DhCt      PIN_A1
#define BatCt     PIN_A2
#define DHT-11    PIN_A4
#define SPI_MISO  PIN_B1
#define SPI_MOSI  PIN_B2
#define RF24_CS   PIN_B3
#define SPI_CLK   PIN_B4
#define RF24_CE   PIN_B5
#define RF24_IRQ  PIN_B0
#define  RF24_PERFORMANCE_MODE   //performance mode ON
#define PGC   PIN_B6
#define PGD   PIN_B7
#define RF24_SPI STREAM_SPI2

#include <nRF24L01P.c>

void main()
{
   setup_adc_ports(sAN0);
   setup_adc(ADC_CLOCK_INTERNAL);
   setup_timer_1(T1_INTERNAL|T1_DIV_BY_8);      //2,0 s overflow

   while(TRUE)
   {
      output_high(PIN_A7);
      delay_ms(100);
      output_low(PIN_A7);
      delay_ms(100);
      RF24_driver_use_example_TXdata_simple();
   }

}

My problem is that I have to make modification into driver to compile.
I changed the code on:
Code:

int RF24_comm(int comm, int32 comm1, int commDS) {
  //commDS=datasize(1 to 32 bits)
   int rv; //rv=return value(SPI nRF24 status read value)
   RF24_select();
   RF24_xfer(comm);    //RF24 Write address/command (see RF24_addr addresses list tabble in .h file)
   rv=spi_xfer(RF24_SPI, comm1); //Write config.value or command (1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER rv=spi_xfer(RF24_SPI, comm1, commDS);
   rv=spi_read2();    //It's necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;

I have to suppress commDS from spi_xfer to not have the error:
"Expression must evaluate a constant".

Second error:

In nrf24l01p.h i modify:
Code:

//Automated functions contemplated register.   
enum RF24_STATUS {   // **Status Register (In parallel to the SPI command word applied on the MOSI pin, the STATUS register is shifted serially out on the MISO pin)
   IRQ_RX_dataready  =0b01000000,   // (0)Data Ready RX FIFO interrupt. Asserted when new data arrives RX FIFOc.Write 1 to clear bit.
   IRQ_TX_datasent   =0b00100000,   // (0)Data Sent TX FIFO interrupt. Asserted when packet transmitted on TX. If AUTO_ACK is activated,this bit is set high only when ACK isreceived.Write 1 to clear bit.
   IRQ_MAX_retransmit=0b00010000,   // (0)Maximum number of TX retransmits interrupt Write 1 to clear bit. If asserted it must be cleared to enable further communication.
   IRQ_ALL           =0b01110000,   // Allows clearing all IRQs at the same time
   RX_PIPE0          =0b00000000,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_PIPE1          =0b00000010,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_PIPE2          =0b00000100,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_PIPE3          =0b00000110,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_PIPE4          =0b00001000,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_PIPE5          =0b00001010,   // (R)(bits 3:1)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   RX_BUFFER_EMPTY   =0b00001110,   // (R)Data pipe number for the payload available for reading from RX_FIFO 000-101: Data Pipe Number
   TX_BUFFER_FULL2    =0b00000001    // (R)(0)TX FIFO full flag. 1: TX FIFO full. 0: Available locations in TX FIFO.
   };

I have to change TX_BUFFER_FULL to TX_BUFFER_FULL2 to not have the error:
"Identifier is already used in this scope".

Are there some more errors to correct to be able to communicate as soon as possible ? I want to communicate with a Raspberry.

Thank you a lot.

Sebastien, Pic Dummy.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed May 03, 2017 5:57 pm     Reply with quote

sebcar wrote:

I have to suppress commDS from spi_xfer to not have the error:
"Expression must evaluate a constant".

That's because in modern versions of the CCS compiler, if you specify
hardware spi in the #use spi() statement, then CCS will only allow a
constant numeric value for the "number of bits" parameter in spi_xfer().
In other words, it gives an error for this:
Code:
rv=spi_xfer(RF24_SPI, comm1, commDS);

But it will compile with this:
Code:
rv=spi_xfer(RF24_SPI, comm1, 8);

But you don't have to worry about it. You can comment out the last
RF24_comm() function in that section of code. The last section is not used.
Comment it out, as shown below. Then it's no problem:
Code:

/*
int RF24_comm(int comm, int32 comm1, int32 commDS) {   //commDS=datasize(1 to 32 bits)
   int rv;                             //rv=return value(SPI nRF24 status read value)
   RF24_select();       
   RF24_xfer(comm);                    //RF24 Write address/command(see RF24_addr addresses list tabble in .h file)
   rv=spi_xfer(RF24_SPI, comm1, commDS); //Write config.value or command(1 to 32 bits of data)___I CANNOT USE RF24_xfer() ALIAS BECAUSE IT NOT ACCEPTS MORE THAN 1 PARAMETER
//   rv=spi_read();                     //It´s necessary due to spi_xfer read bug
   RF24_unselect();   
   return rv;                    //Return last read value
}
*/



sebcar wrote:
#USE SPI(FORCE_SW, SPI2, MASTER, BAUD=1000000, MODE=0, BITS=8, MSB_FIRST, STREAM=STREAM_SPI2)

#define RF24_SPI STREAM_SPI2

There are several problems in your #use spi() statement above:
1. There is no "SPI2" module in the 16LF88. That PIC only has SPI1.
2. It's better to use hardware SPI, because it's faster.
3. I see no need to rename the stream.

I changed it to this:
Code:
#USE SPI(MASTER, SPI1, BAUD=1000000, MODE=0, BITS=8, MSB_FIRST, STREAM=RF24_SPI)

// #define RF24_SPI STREAM_SPI2   // Comment out, or delete this line.


Then it should compile, though it will still give some warnings.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> Code Library All times are GMT - 6 Hours
Goto page Previous  1, 2, 3 ... 17, 18, 19, 20  Next
Page 18 of 20

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group