CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC24HJ128GP306 Brown-out voltage threshold

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
benoitstjean



Joined: 30 Oct 2007
Posts: 566
Location: Ottawa, Ontario, Canada

View user's profile Send private message

PIC24HJ128GP306 Brown-out voltage threshold
PostPosted: Wed Aug 07, 2013 9:08 am     Reply with quote
COMPILER: 4.137
PIC: PIC24HJ128GP306

Is there a way in CCS somehow to change the brown-out reset voltage threshold (in assembly code or C code)?

If so, can you please provide details. I am going through the PIC docs but can't seem to find anything other than the brief section 21.3.

Thanks.

Ben
Ttelmah



Joined: 11 Mar 2010
Posts: 19520

View user's profile Send private message

PostPosted: Wed Aug 07, 2013 1:40 pm     Reply with quote
Reason is simple. This chip has a fixed brownout voltage. No adjustment possible. It is in the data sheet. If you look at ones with variable brownout voltages these are listed in the DC characteristics, with the bit patterns needed to select them, as Vbor. On this chip you just have one line for the brownout, giving just one voltage range 2.4 to 2.55v.

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group