CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Capture H_TO_L and L_TO_H for the output

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
mvliege



Joined: 05 Aug 2014
Posts: 7
Location: Turkey

View user's profile Send private message Send e-mail

Capture H_TO_L and L_TO_H for the output
PostPosted: Thu Jan 14, 2016 3:13 am     Reply with quote
Hi all,

I want to capture H_to_L.
But when the finish H_TO_L, the output must be driven off.
And when the finish L_To_H, the output must be driven on.
I just would like to create on/off output.
I have used two timers, Timer0 and Timer1.

Could you please help me? (below picture)
https://yadi.sk/d/s94KM6UTmvtAy

All the best
Mehmet
Humberto



Joined: 08 Sep 2003
Posts: 1215
Location: Buenos Aires, La Reina del Plata

View user's profile Send private message

PostPosted: Fri Jan 15, 2016 2:01 pm     Reply with quote
First of all, you would try with one of these:

http://www.ccsinfo.com/books.php

regards,
_________________
Humber
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group