![](templates/subSilver/images/CCSLogo.jpg) |
![CCS C Software and Maintenance Offers](templates/subSilver/images/forumAd6.jpg) |
View previous topic :: View next topic |
Author |
Message |
WildLife
Joined: 08 Jun 2011 Posts: 2
|
Problem sending command from 16F877 to GPRS modem |
Posted: Wed Jun 08, 2011 8:21 pm |
|
|
Hi guys, first post here
I'm trying to communicate my 16F877 with a GPRS modem (ADH8066 with the evaluation board from sparkfun).
I'm using the following code:
Code: |
#include <16F877A.h>
#fuses HS,NOWDT,NOLVP,PUT,NOPROTECT,NOBROWNOUT,NOWRT
#use delay(clock=20000000)
#use rs232(baud=115200,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8,stream=GPRS,ERRORS)
#define BUFFER_SIZE 32
BYTE buffer[BUFFER_SIZE];
BYTE next_in = 0;
BYTE next_out = 0;
#define bkbhit (next_in!=next_out)
char cmd_str[20];
byte bgetc()
{
byte c;
while(!bkbhit) ;
c=buffer[next_out];
next_out=(next_out+1) % BUFFER_SIZE;
return(c);
}
#int_rda
void serial_received()
{
int t;
buffer[next_in]=getc();
t=next_in;
next_in=(next_in+1) % BUFFER_SIZE;
if(next_in==next_out)
next_in=t; // Buffer full !!
}
void init()
{
setup_adc_ports(NO_ANALOGS);
setup_adc(ADC_OFF);
setup_spi(FALSE);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_comparator(NC_NC_NC_NC);
setup_vref(FALSE);
enable_interrupts(GLOBAL);
enable_interrupts(INT_RDA);
output_high(GSM_ONKEY);
output_high(GSM_CTS);
output_high(GSM_DSR);
output_low(GSM_LED);
}
int startGSM()
{
delay_ms(200);
output_high(GSM_ONKEY);
output_high(GSM_CTS);
output_high(GSM_DSR);
delay_ms(500);
output_low(GSM_ONKEY);
delay_ms(2000);
output_high(GSM_ONKEY);
delay_ms(300);
output_low(GSM_CTS);
output_low(GSM_DSR);
delay_ms(4000);
//ler ready!
return 1;
}
void testePrintGSM()
{
delay_ms(1000);
fprintf(GPRS,"AT\n");
delay_ms(1000);
}
void main()
{
int8 cont = 0;
unsigned char a;
init();
timeout(5);
output_high(GSM_LED);
startGSM();
output_low(GSM_LED);
timeout(15);
while(true)
{
// Searches for 'ady' from the word Ready witch means modem has reset
if (bkbhit)
{
a = bgetc();
}
if (a == 'a')
{
a = bgetc();
if (a == 'd')
{
a = bgetc();
if (a == 'y')
{
output_high(GSM_LED);
timeout(3);
testePrintGSM();
}
}
}
// Searches for OK, reply from the command fprintf(GRPS,"AT\n")
else if (a == 'O')
{
a = bgetc();
if (a == 'K')
{
output_low(GSM_LED);
}
}
delay_ms(50);
}
|
Sorry for the big code, anyways, I'm able to read from the modem the "Ready" reply, but I can't read the OK reply, so I assume I'm not being able to send the "AT\n" command. Any ideas?
BTW I've already tried fprintf, putc, and so on, with no luck :/
Thanks,
WildLife |
|
![](templates/subSilver/images/spacer.gif) |
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
Posted: Wed Jun 08, 2011 9:13 pm |
|
|
Quote: | fprintf(GPRS,"AT\n");
|
Your final character is a newline, but the modem expects a carriage
return, which is a \r. |
|
![](templates/subSilver/images/spacer.gif) |
WildLife
Joined: 08 Jun 2011 Posts: 2
|
|
Posted: Thu Jun 09, 2011 8:59 am |
|
|
PCM programmer wrote: | Quote: | fprintf(GPRS,"AT\n");
|
Your final character is a newline, but the modem expects a carriage
return, which is a \r. |
That might have saved me some hassle in the future, but still it isn't working :(
Any other thoughts?
Thanks |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|