![](templates/subSilver/images/CCSLogo.jpg) |
![CCS C Software and Maintenance Offers](templates/subSilver/images/forumAd6.jpg) |
View previous topic :: View next topic |
Author |
Message |
becool123
Joined: 12 Jul 2010 Posts: 2
|
xbee radio communication between PICs |
Posted: Mon Jul 12, 2010 4:23 am |
|
|
Hi,
I m trying to send the temperature from one PIC to an other and I am facing some problems.
I work in simulation mode, Proteus 7 for the schematic and CCS C for the C Code.
Here My Code,
the file UART.c
Code: |
char RecUART (void);
void EmitUART(char c);
void InitUART(void);
/* Initialisation de l'UART */
void InitUART(void)
{
TXSTA = 0x20;
RCSTA = 0x90;
SPBRG = 0x06;
}
/* Emission d'un octet sur l'UART */
void EmitUART(char c)
{
TXREG = c;
}
/* Reception d'un Octet sur l'UART */
char RecUART (void)
{
return(RCREG);
}
|
The file xbee.c
Code: |
#include "USART.c"
void InitXbee(void)
{
set_tris_d=0x18;
PORTD=0x05;
}
void SendByte(char c)
{
EmitUART(c);
}
char ReadByte(void)
{
return(RecUART());
}
void SendString(const unsigned char *s)
{
int i=0;
while(s[i]!='\0')
{
/* utilisation de lcd_putch */
SendByte(s[i]);DelayMs(100);
i++;
}
void ReadString(const unsigned char *s)
{
int i=0;
while( ReadByte()!='\0')
{
s[i]=ReadByte()
i++;
DelayMs(100);
}
}
|
Emitters code
Code: |
#include <16F877.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include "Lcd.c"
#include "USART.c"
#device adc= 10 //sur 10 bits
#fuses HS, NOWDT, NOLVP, NOBROWNOUT, NOPROTECT, PUT
#use delay(clock=20000000)
#use rs232(baud=19200, xmit=PIN_C6, rcv=PIN_C7)
#byte PortA = 5 // adresse du PORT A
#byte PortB = 6 // adresse du PORT B
long tension;
float val;
char ordre[32];
void main() {
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
set_tris_a(0b00001111);
setup_adc_ports(A_ANALOG);
setup_adc(ADC_CLOCK_DIV_32);
set_adc_channel(0);
InitUART();
InitXbee();
while(1)
{
delay_ms(100);
tension = read_adc();
temp=((float)tension/1023)*5*100;
sprintf(ordre,"%f",temp)//pour convertir de float à string
SendString(ordre);
}
}
|
receiver code
Code: |
#include <16F877.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#use delay(clock=20000000)
#fuses HS, NOWDT, NOPROTECT, PUT, NOLVP
#use rs232 (baud = 9600, xmit = PIN_C6, rcv = PIN_C7)
#include "Lcd.c"
#include "Lcd.c"
#include "USART.c"
void main()
{
char ordre[32];
lcd_init();
InitUART();
InitXbee();
while(1 ){
ReadString(ordre);
printf(lcd_putc,"\f%f C",ordre);
}
}
|
Thank you for your future response. |
|
![](templates/subSilver/images/spacer.gif) |
nina
Joined: 20 Apr 2007 Posts: 111
|
xbee |
Posted: Mon Jul 12, 2010 9:35 am |
|
|
becool123
where did you get xbee.c ?
tks
nina |
|
![](templates/subSilver/images/spacer.gif) |
ckielstra
Joined: 18 Mar 2004 Posts: 3680 Location: The Netherlands
|
|
Posted: Mon Jul 12, 2010 9:38 am |
|
|
Quote: | and I am facing some problems. | It helps if you describe what your problem is. Here we are not good in reading minds (yet).
Code: | #include "Lcd.c"
#include "Lcd.c" | 1 time is enough.
Code: | void InitUART(void)
{
TXSTA = 0x20;
RCSTA = 0x90;
SPBRG = 0x06;
} | This will overwrite the settings from the '#use RS232' line. Delete these lines.
Code: | /* Emission d'un octet sur l'UART */
void EmitUART(char c)
{
TXREG = c;
}
/* Reception d'un Octet sur l'UART */
char RecUART (void)
{
return(RCREG);
} | Why not use putc() and getc()? These are more portable and CCS has included some code to handle error flags in the UART.
Code: | #use rs232(baud=19200, xmit=PIN_C6, rcv=PIN_C7) | Add 'ERRORS'. This makes the CCS compiler insert code for clearing error flags in the UART.
Code: | void ReadString(const unsigned char *s)
{
int i=0;
while( ReadByte()!='\0')
{
s[i]=ReadByte()
i++;
DelayMs(100);
}
} | Why the 100ms delay? Characters will arrive at 19200bps ~ 1920 characters / second ~ 0.5ms per character.
The hardware UART has a receive buffer for 3 characters. When receiving more data the UART will stop and only start again when the error status is cleared (that's why I like the CCS functions!).
Remove this delay, and many of the other delays as well. |
|
![](templates/subSilver/images/spacer.gif) |
becool123
Joined: 12 Jul 2010 Posts: 2
|
|
Posted: Mon Jul 12, 2010 11:10 am |
|
|
thank you really for your response
I corrected some lines in my code thanks to your comments, and you have reason about "USART.c", we can use putc(), puts(), getc() , gets() .
So the problem is in Xbee.c :
In the datasheet of xbee, they talk about AT command, RTS, CTS!!!
Should I use them or I can send I receive like I did?
Thank you |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|