CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Problem with strcat

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Problem with strcat
PostPosted: Fri Sep 18, 2009 5:45 pm     Reply with quote
Reading velocity from GPS string and sending to hyperterminal, which works fine. Now wish to add "km/h" to end of string. Have tried strcat and all sorts of garbage coming out now. Any help appreciated.

Code:
#include <16f716.h>
#fuses HS,NOWDT,NOPROTECT
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_B3, rcv=PIN_B2, parity=N, bits=8, ERRORS)
#include <string.h>

char z, temp[20], temp2[20];
int i, j;

#define LED PIN_B5

void main(){
   output_high(LED);
   delay_ms(5000);
   output_low(LED);
   strcpy(temp2,"km/h");      //change to code after working
   while(TRUE){
      i=0;
      j=0;
      while(TRUE){
         z=getc();
         if(z=='$')
            break;
      }
      z=getc();
      if(z=='G')
        z=getc();
        if(z=='P')
          z=getc();
            if(z=='V'){
              z=getc();
              if(z=='T')
                z=getc();
                if(z=='G')

                  while(j<7){
                     z=getc();
                     if(z==',')
                        j++;
                  }

                  output_high(LED);
                     while(TRUE){
                        z=getc();
                        if(z==',')
                           break;
                        temp[i]=z;
                        i++;
                     }
                     
                     
                     strcat(temp,temp2);        //change to code after working
                     i=i+4;                            //change to code after working
                     
                     temp[i]='\r';
                     i++;
                     /*i++;
                     temp[i]='\n';*/
                     temp[i]='\0';
                     printf(temp);
                     output_low(LED);
            }
   }
}
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri Sep 18, 2009 6:07 pm     Reply with quote
strcat() only works with strings. Make sure that both parameters are
strings. This means, ascii characters with a 0x00 byte just at the end
of the characters. More info:
http://www.macdonald.egate.net/CompSci/hstrings.html
Guest
PostPosted: Fri Sep 18, 2009 6:18 pm     Reply with quote
Cheers, all very clear now, seems my null terminator is out of place. Fixed and working. Help appreciated
santicomp
Guest
strcat
PostPosted: Fri Nov 13, 2009 2:04 pm     Reply with quote
Hi, I am trying to append 2 strings to do atoi and the int value. But the append does not work. The atoi needs /0 to work. I don't know what I am doing wrong. What is the way to append 2 strings and what is the way to do atoi? Thanks alot.
Code:

void ciclos(char f,int8 n)
{
int1 num;
int8 i;
int8 l;
char string1[1];
char string2[5];
char *string3;

if (f!=0){

printf(lcd_putc,"%c",f);
strcpy(string1,"\0");
strcpy(string2,f);

*string3=strcat(string1,string2);
l=atoi(string3);
/* switch (f){
       case '1':l=1;
       break;
       case '2':l=2;
       break;
       case '3':l=3;
       break;
       case '4':l=4;
       break;
       case '5':l=5;
       break;
       case '6':l=6;
       break;
       case '7':l=7;
       break;
       case '8':l=8;
       break;
       case '9':l=9;
       break;
}
*/
for (i=1 ; i<=l;i++)
{
delay_ms(300);
actrelay();
delay_ms(300);
dearelay();

}
lcd_putc("\fTerminado");

}

num=0;
}
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group