 |
 |
| View previous topic :: View next topic |
| Author |
Message |
noyz
Joined: 31 Jan 2009
Posts: 59
|
| Delay problem. |
 Posted: Fri Aug 14, 2009 9:55 am |
 |
|
If i use delay_ms(time) with any time the program stops before the delay.
if i don't use delay, my program works just fine.
I've installed 3 version of windows, because I didn't have this kind of problem before, I've tried CCS 4.057, CCS PCWHD v4.084, and the same problem...
Did anyone had this problem before ?
| Code: |
void main()
{
int16 t;
t=100;
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
setup_timer_1(T1_DISABLED);
setup_comparator(NC_NC);
setup_vref(FALSE);
while ( TRUE )
{
if(input(PIN_A0))
{
output_low(PIN_A4);//stop faza scurta/lunga
output_high(PIN_A5);//bec on
output_low(PIN_A2);//proiectoare on
delay_ms(t);
output_low(PIN_A5);//bec off
output_high(PIN_A2);//proiectoare off
}
else output_high(PIN_A4);
}
} |
the lst | Code: |
*
0000: MOVLW 00
0001: MOVWF 0A
0002: GOTO 004
0003: NOP
0004: CALL 3FF
0005: BSF 03.5
0006: MOVWF 10
0007: MOVLW 00
0008: MOVWF 0A
0009: GOTO 01E
.................... #include "C:\Documents and Settings\Noyz2k\My Documents\flashuri noyz\flash12f675.h"
.................... #include <12F675.h>
.................... //////// Standard Header file for the PIC12F675 device ////////////////
.................... #device PIC12F675
.................... #list
....................
....................
.................... #FUSES NOWDT //No Watch Dog Timer
.................... #FUSES INTRC_IO //Low power osc < 200 khz
.................... #FUSES NOCPD //No EE protection
.................... #FUSES NOPROTECT //Code not protected from reading
.................... #FUSES NOMCLR //Master Clear pin used for I/O
.................... #FUSES NOPUT //No Power Up Timer
.................... #FUSES BROWNOUT //Reset when brownout detected
.................... #FUSES BANDGAP_HIGH
.................... #use delay(clock=4 000 000)
000A: MOVLW 29
000B: MOVWF 04
000C: MOVF 00,W
000D: BTFSC 03.2
000E: GOTO 01D
000F: MOVLW 01
0010: MOVWF 21
0011: CLRF 20
0012: DECFSZ 20,F
0013: GOTO 012
0014: DECFSZ 21,F
0015: GOTO 011
0016: MOVLW 4A
0017: MOVWF 20
0018: DECFSZ 20,F
0019: GOTO 018
001A: GOTO 01B
001B: DECFSZ 00,F
001C: GOTO 00F
001D: RETLW 00
....................
....................
....................
....................
.................... void main()
.................... {
001E: CLRF 04
001F: MOVLW 1F
0020: ANDWF 03,F
0021: BCF 1F.6
0022: BSF 03.5
0023: BCF 1F.0
0024: BCF 1F.1
0025: BCF 1F.2
0026: BCF 1F.3
0027: MOVLW 07
0028: BCF 03.5
0029: MOVWF 19
.................... int16 t;
.................... t=100;
002A: CLRF 27
002B: MOVLW 64
002C: MOVWF 26
.................... setup_adc_ports(NO_ANALOGS|VSS_VDD);
002D: BCF 1F.6
002E: BSF 03.5
002F: BCF 1F.0
0030: BCF 1F.1
0031: BCF 1F.2
0032: BCF 1F.3
.................... setup_adc(ADC_OFF);
0033: BCF 03.5
0034: BCF 1F.0
.................... setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
0035: BSF 03.5
0036: MOVF 01,W
0037: ANDLW C7
0038: IORLW 08
0039: MOVWF 01
.................... setup_timer_1(T1_DISABLED);
003A: BCF 03.5
003B: CLRF 10
.................... setup_comparator(NC_NC);
003C: MOVLW 07
003D: MOVWF 19
003E: BSF 03.5
003F: MOVF 05,W
0040: MOVWF 05
0041: MOVLW 03
0042: BCF 03.5
0043: MOVWF 20
0044: DECFSZ 20,F
0045: GOTO 044
0046: MOVF 19,W
0047: BCF 0C.3
.................... setup_vref(FALSE);
0048: BSF 03.5
0049: CLRF 19
....................
....................
.................... while ( TRUE )
.................... {
.................... if(input(PIN_A0))
004A: BSF 05.0
004B: BCF 03.5
004C: BTFSS 05.0
004D: GOTO 070
.................... {
.................... output_low(PIN_A4);//stop faza scurta/lunga
004E: BSF 03.5
004F: BCF 05.4
0050: BCF 03.5
0051: BCF 05.4
.................... output_high(PIN_A5);//bec on
0052: BSF 03.5
0053: BCF 05.5
0054: BCF 03.5
0055: BSF 05.5
.................... output_low(PIN_A2);//proiectoare on
0056: BSF 03.5
0057: BCF 05.2
0058: BCF 03.5
0059: BCF 05.2
.................... delay_ms(t);
005A: MOVF 27,W
005B: MOVWF 28
005C: INCF 28,F
005D: DECF 28,F
005E: BTFSC 03.2
005F: GOTO 064
0060: MOVLW FF
0061: MOVWF 29
0062: CALL 00A
0063: GOTO 05D
0064: MOVF 26,W
0065: MOVWF 29
0066: CALL 00A
.................... output_low(PIN_A5);//bec off
0067: BSF 03.5
0068: BCF 05.5
0069: BCF 03.5
006A: BCF 05.5
.................... output_high(PIN_A2);//proiectoare off
006B: BSF 03.5
006C: BCF 05.2
006D: BCF 03.5
006E: BSF 05.2
.................... }
.................... else output_high(PIN_A4);
006F: GOTO 074
0070: BSF 03.5
0071: BCF 05.4
0072: BCF 03.5
0073: BSF 05.4
.................... }
0074: BSF 03.5
0075: GOTO 04A
.................... }
0076: SLEEP
Configuration Fuses:
Word 1: 31D4 NOWDT NOCPD NOPROTECT NOMCLR NOPUT INTRC_IO BROWNOUT BANDGAP_HIGH
|
|
|
 |
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Fri Aug 14, 2009 11:12 am |
|
|
What do you mean by "it stops" ?
Does it stop running as a stand-alone program ?
Or does it appear to stop when running it under the debugger ?
Tell us the testing environment. |
|
|
noyz
Joined: 31 Jan 2009
Posts: 59
|
|
| Posted: Fri Aug 14, 2009 7:45 pm |
|
|
Proteus 7.1 and the circuit verified with oscilloscope.
In Proteus I've put the PIC, logic input and logic probes.
It stops after doing everything before delay. |
|
|
Ttelmah
Guest
|
|
| Posted: Sat Aug 15, 2009 9:17 am |
|
|
Obvious question. Have you tried removing the delay?.
Add a simple 'delay' count loop of your own making. Does it still stop?.
Things that might apply:
One of the circuits you are switching with your 'output' statements, is spiking the PIC.
How is the watchdog setup?.
There is nothing special about delay. It is just a carefully timed loop. If the code goes wrong _before_ the delay, look what is being done _before_ the delay....
Best Wishes |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
