CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
UART Software

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
nasbyc



Joined: 27 Apr 2009
Posts: 50

View user's profile Send private message AIM Address

UART Software
PostPosted: Mon Apr 27, 2009 3:19 pm     Reply with quote
hi there

Currently I'm working on navigating using optical mouse. I already constructed my circuit using PIC16F877A. Its RX and TX pin already connected to max232. I bought a coprocessor pak-xi from william. This coprocessor will handle the communication protocol. The usb mouse will connect directly to the coprocessor. How can I send the data from the coprocessor to the PIC? The pak-xi has TX and RX pin. Someone told me that I should use uart software. How can I use it?
bungee-



Joined: 27 Jun 2007
Posts: 206

View user's profile Send private message

PostPosted: Tue Apr 28, 2009 2:33 pm     Reply with quote
For example ....

#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8)
#use rs232(baud=9600,parity=N,xmit=PIN_C0,rcv=PIN_C1,bits=8)

RTFM Wink
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group