CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC30 - Using QEI and ADC in sleep mode

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
PIC30 - Using QEI and ADC in sleep mode
PostPosted: Thu Dec 04, 2008 9:53 am     Reply with quote
Ive got a project that is taking ADC readings, as well as using the quadrature encoder interface to correlate the angle that the readings were taken at to the readings themselves. Im using a PIC30F4011. I don't know if it is universal to all PICs, but on my device, the QEI doesn't run in sleep mode. Thus, running the ADC in sleep mode causes the QEI to miss pulses. I've tried using the ADC without sleep mode, and I don't get as stable of a number.

What solutions are there to getting stable readings and not miss QEI ticks?
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group