CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
rs232 communication problem

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
engineer_1



Joined: 27 Mar 2007
Posts: 6

View user's profile Send private message

rs232 communication problem
PostPosted: Fri May 25, 2007 6:22 am     Reply with quote
hi;
i communicate 16f877 and pc via a delphi interface program.at first i give power to PIC card and then i start my computer.i open my delphi program and run it.but it doesnt communicate with PIC.if a reset PIC when my program is open,PIC communicates eith PC after reset.what do i have to do?this occurs only at the start of PC.
Pret



Joined: 18 Jul 2006
Posts: 92
Location: Iasi, Romania

View user's profile Send private message

PostPosted: Wed May 30, 2007 6:45 am     Reply with quote
You sould post your RDA_ISR code. Maybe you have a driver that checks some external devices (like UPS)... and sends some data which is interpreted wrong in PIC. Maybe this is blocking the PIC uart.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group