CCS config bits vs datasheet's

[Guest]

When using this statement:

#fuses MCLR,WDT,PROTECT

The compiler generates this in the LST file:

Configuration Fuses:
Word 1: 0FF7 MCLR PROTECT WDT

However, the data sheet for the PIC10F200 specifies the configuration word as:

bit 11-5 Unimplemented: Read as ‘0’
bit 4 MCLRE: GP3/MCLR Pin Function Select bit
1 = GP3/MCLR pin function is MCLR
0 = GP3/MCLR pin function is digital I/O, MCLR internally tied to VDD
bit 3 CP: Code Protection bit
1 = Code protection off
0 = Code protection on
bit 2 WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0 Reserved: Read as ‘0’

So for MCLR, PROTECT, WDTE, shouldn't the word be 0000 0001 0100?
or 0x014?

[Ttelmah]

Says 'read as 0', not that they have to be written as '0'. So any permutation, with:

xxxx xxxx xxx1 01xx

Best Wishes

[Guest]

Very interesting -Thanks!