CCS :: View topic - Is this a bug or a feature of sprintf?

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

Is this a bug or a feature of sprintf?

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

kender

Joined: 09 Aug 2004
Posts: 768
Location: Silicon Valley

Is this a bug or a feature of sprintf?

Posted: Thu Feb 28, 2008 8:47 pm

Code:

int32 iADC; // 24-bit value from an external ADC AD7718, MSByte is always 0
// read the ADC
sprintf(strOut, "%6LX", iADC);

Expected: 6 hexadecimal characters
Actual: 8 hexadecimal characters

PCWH 3.240, PIC18LF4520
_________________
Read the label, before opening a can of worms.

PCM programmer

Joined: 06 Sep 2003
Posts: 21708

Posted: Thu Feb 28, 2008 9:57 pm

See the test program shown below:

vs. 3.240 displays this:

Quote:

00123456

vs. 3.249 displays this:

Quote:

00123456

vs. 4.068 displays this:

Quote:

123456

Code:

#include <18F452.h>
#fuses XT,NOWDT,NOPROTECT,BROWNOUT,PUT,NOLVP
#use delay(clock=4000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7, ERRORS)

//====================================
void main()
{
int32 iADC;
char strOut[20];

iADC = 0x00123456;

sprintf(strOut, "%6LX", iADC);

printf(strOut);

while(1);
}

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum