CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Mplab IDE ICD 2 Debugger

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
umka



Joined: 28 Aug 2007
Posts: 99
Location: New Zealand

View user's profile Send private message

Mplab IDE ICD 2 Debugger
PostPosted: Thu Oct 04, 2007 1:50 pm     Reply with quote
i am looking to buy a Mplab IDE ICD 2 Debugger and want to know if it will work with CCS v4.038. can one set it up to be used inside of CCS so one does not have to go into mplab to use it? as i understand the icd does the programming and reprogramming, is this correct?

currently i am using a jdm type programmer and icprog to program through a serial connection and just want to change so i can do it all in CCS and USB.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Oct 04, 2007 2:04 pm     Reply with quote
Quote:
Can one set it up to be used inside of CCS

You mean inside the PCWH IDE.

See the answer in the CCS FAQ:
http://www.ccsinfo.com/faq.php?page=icd2_and_pcwh


Here's the main CCS technical FAQ page:
http://www.ccsinfo.com/faq.php
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group