CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Compare data

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Shardik
Guest
Compare data
PostPosted: Thu Apr 26, 2007 10:30 am     Reply with quote
I need to compare two ip address, this is my code:

typedef struct {
int v[4];
} ip_addr;

And the problem:

ip_addr ip1=192,168,6,5;
ip_addr ip2=192,168,6,5;

How can i compare this two ip?

ip1==ip2 doesnt work, and ip must be a ip_addr type, what can i do? with pointers?
frequentguest
Guest
PostPosted: Thu Apr 26, 2007 10:59 am     Reply with quote
A good way to deal with IP addresses is to use a union.
Code:
typedef union
{
   int8   bytes[4];
   int32 ip
} ip_addr;


This way you can easily deal with the IP address byte-wise or as a whole.

Code:
ip_addr ip1;

ip1.bytes[0]=255;
ip1.ip=0xFFFFFFFF;
[/code]
treitmey



Joined: 23 Jan 2004
Posts: 1094
Location: Appleton,WI USA

View user's profile Send private message Visit poster's website

PostPosted: Thu Apr 26, 2007 11:04 am     Reply with quote
yup
Code:
#include <16F877.h>
#use delay(clock=4000000)
#fuses HS,NOWDT,NOLVP
#use rs232(baud=19200,xmit=PIN_C0,invert,stream=DEBUG,disable_ints) // stderr(same as debug)
#use fast_io (a)
  union ip_def
  {
    int8 oct[4];
    int32 combined;
  };

  union ip_def ip_i;
  union ip_def ip_o;
//======================= Main ==============================
void main(void)
{

  ip_i.oct[0]=255;
  ip_i.oct[1]=255;
  ip_i.oct[2]=255;
  ip_i.oct[3]=255;
 
  ip_o.oct[0]=255;
  ip_o.oct[1]=255;
  ip_o.oct[2]=255;
  ip_o.oct[3]=1;

  tris_a=0xFF;
  setup_adc_ports(NO_ANALOGS);
  setup_adc(ADC_OFF);
  if(ip_i.combined != ip_o.combine) fprintf(DEBUG,"nope\n\r");
  while(1)
  {
  }
}
Shardik
Guest
Thx
PostPosted: Thu Apr 26, 2007 3:41 pm     Reply with quote
Thxs a lot for the replys, it really help me, but im still having some problems:


Code:

typedef union{
int8 v[4];
int32 combined;
} ip_addr;


typedef struct {
mac_addr mac;
ip_addr ip;
} arp_table;

arp_table tabla;
ip_addr sr;

tabla.ip=192,168,8,3;

sr=192,168,8,3;

if(tabla.ip.combined==sr.combined) printf(lcd_putc,"YES");
else printf(lcd_putc,"NO");


Nevers says YES!!! Do you know where is the problem?
Shardik
Guest
PostPosted: Thu Apr 26, 2007 3:48 pm     Reply with quote
And how can i do with mac address? (6byte addres)

union ip{
int8 v[4];
int32 combined;
}

union mac{
int8 v[6]:
??? combined;
}
frequentguest
Guest
PostPosted: Thu Apr 26, 2007 3:58 pm     Reply with quote
The purpose of the union is that you can treat the ip address as either a 32-bit int or as 4 individual bytes. I imagine the compiler doesn't know what to do with these lines:
Quote:
Code:
tabla.ip=192,168,8,3;

sr=192,168,8,3;


you can use:
Code:

tabla.ip.v[0]=192;
tabla.ip.v[1]=168;
tabla.ip.v[2]=8;
tabla.ip.v[3]=3;

//or easier yet
tabla.ip.combined=0xC0A80803;

and then do your comparison
frequentguest
Guest
PostPosted: Thu Apr 26, 2007 3:59 pm     Reply with quote
as for the mac address issue, since the compiler can't handle a 48-bit variable, look at the memcpy() function of the compiler.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group