CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
How to decode X10 in CCS C

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
pete
Guest
How to decode X10 in CCS C
PostPosted: Tue Mar 27, 2007 5:33 am     Reply with quote
Hi there!

Can you post a code in CCS C how to decode an X10 signal? I know x10 first sends 1110 then house code then function code then 3 cycles pause and repeats the same pattern. I just want to decode the function code and lit an LED corresponding to this function code. I'm aware that transmission is just after the zero crossing detector of AC line and there is a format in transmiiting a "1" and a "0".
THanks...
dyeatman



Joined: 06 Sep 2003
Posts: 1923
Location: Norman, OK

View user's profile Send private message

PostPosted: Tue Mar 27, 2007 5:45 am     Reply with quote
You can find the CCS versions in the CCS example and driver directories. You still have to have the X10 powerline interface.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group