CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
18(L)F45J10: ADC not work !!!

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
messerschmitt
Guest
18(L)F45J10: ADC not work !!!
PostPosted: Tue Aug 29, 2006 1:41 pm     Reply with quote
With this chips and CCS PCH V3.249 & V4.00x all ADC library call's not work !!!

PIC18(L)F45J10 have 3 ADCON Registers, CCS will only support PIC18 devices with 2 ADCON Regsiters !?

Only as work arround its is possible the direkt BIT access to the phys. register adresses...

-> CCS: please correct this and give new "devices" file for V3.249 & all new versions
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Aug 29, 2006 2:34 pm     Reply with quote
I compiled a test program for the 18F45J10 for PCH 3.249 and looked
at the .LST file. It uses all three ADCON registers.

I suggest that you make a small test program, similar to the one
shown in this post, and see if it works:
http://www.ccsinfo.com/forum/viewtopic.php?t=26847&start=1
If it doesn't work, then post your test program.

Also, please limit the testing to vs. 3.249. I don't want to look at
vs. 4.xxx.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group