CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
ICSP

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
hadeelqasaimeh



Joined: 05 Jan 2006
Posts: 105

View user's profile Send private message

ICSP
PostPosted: Tue Aug 22, 2006 5:00 am     Reply with quote
hi
icant understand what this pin do(ICSP) in 12f675.
its the first time i deal with them,,really i want to know how to use rfpic12f675 but i cant understand any thing.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Aug 22, 2006 5:06 pm     Reply with quote
The two ICSP pins are used to program the rfPIC12F675.
If you have MPLAB vs. 7.40, the README file for the ICD2 says this:
Quote:

1.4 Programmer - Beta Support
rfPIC12F675F
rfPIC12F675H
rfPIC12F675K

The ICD2 can be used to program the PIC, after it is soldered into
your circuit board. However, this requires a complete understanding
of how to design your board for ICSP programming mode. This is
explained in these two Microchip documents:
ICD2 poster:
http://ww1.microchip.com/downloads/en/DeviceDoc/51265e.pdf
ICD2 user's guide:
http://ww1.microchip.com/downloads/en/devicedoc/51331B.pdf
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group