CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Advice needed...LED multiplexing...timer0

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
KamPutty
Guest
Advice needed...LED multiplexing...timer0
PostPosted: Tue Jan 10, 2006 10:22 am     Reply with quote
hi all,

Hope all is well with you.

I need some advice (what?! again?!)

- My project contains 8 7-segment LED's
- I am using a CC LED's
- I am using a picf452@4mhz
- My code can update the LEDs

<question>

Now the issue is this, I need to update the LED's "n" times a second and I was going to do this via the timer0. Running at 4mhz, that means something like only 15 times a second that the timer0 is hit. I am now thinking that I need to speed up my processor (lets say 20mhz) so I can get approx 75 times the timer0 hits per second.

Now am I going this the wrong way? (BTW, I have chosen NOT to use the 7219, for now(?)...)

All the interrupt needs to do is display/update the LED's, it does NO calculations, processing etc other then toggling the LED's...

Any advice would be greatly appriciated!

Thanks all,

~Kam (^8*
MikeValencia



Joined: 04 Aug 2004
Posts: 238
Location: Chicago

View user's profile Send private message Send e-mail Yahoo Messenger

PostPosted: Tue Jan 10, 2006 10:41 am     Reply with quote
I am doing something similiar:
PIC16F747, internal osc. x 4 (PLL x 4) (thus 32 mhz)
4-segment LED common anode display

I use the following to setup my my timer0 isr:

Code:

    int_count = INTS_PER_SECOND;
    set_timer0(0);
    setup_counters( RTCC_INTERNAL, RTCC_DIV_128 | RTCC_8_BIT);
    enable_interrupts(INT_RTCC);
    enable_interrupts(GLOBAL);


This amounts to
(4 * 128 * 256) / 32000000 = .004096 sec per interrupt

For a 4-digit led display, this 4ms refreshing seems ideal. Maybe it's okay for your 8-digit display, or maybe you'll need to do an RTCC_DIV_64.
Notice that i'm using the one of the cheapest possible PICs and not using a crystal.

FYI, my isr looks like this: ('x' goes from 0 to 3, and it marks which digit i am currently refreshing)

Code:

#INT_RTCC
void timer0_isr(void)
{
    static int x = 0;

    if (!GLOBAL_inhibit_all_leds)
    {
        port_a = ca_io[x];
        port_d = GLOBAL_character[x];
    }
    else
    {
        port_a = 0xFF;  // all leds off
    }
 
    x++;
    if (x == 5)
    {
        x = 0;
    }

    if (--int_count == 0)
    {
        ++seconds;
        int_count = INTS_PER_SECOND;
    }
    GLOBAL_led_counter++;
}
MikeValencia



Joined: 04 Aug 2004
Posts: 238
Location: Chicago

View user's profile Send private message Send e-mail Yahoo Messenger

PostPosted: Tue Jan 10, 2006 10:51 am     Reply with quote
I read your post carefully again...
Given that you are using a 4MHz crystal on the PIC18F452, and let's say you will need 2ms to strobe thru each display:

Code:

    set_timer0(0);
    setup_counters( RTCC_INTERNAL, RTCC_DIV_8 | RTCC_8_BIT);
    enable_interrupts(INT_RTCC);
    enable_interrupts(GLOBAL);


This amounts to
(4 * 8 * 256) / 4000000 = .002048 sec per interrupt
KamPutty
Guest
PostPosted: Tue Jan 10, 2006 11:00 am     Reply with quote
Mike,

Thanks for the replay,

This is what I currently have in setup:

Code:

    set_timer0(0);
    setup_counters(RTCC_INTERNAL, RTCC_DIV_256 | RTCC_8_BIT);
    enable_interrupts(INT_RTCC);
    enable_interrupts(GLOBAL);


Do you think you can explain the RTCC_DIV_??? arg. It just has not "clicked" in my brain.

~Kam (^8*
KamPutty
Guest
Success!
PostPosted: Tue Jan 10, 2006 11:35 am     Reply with quote
Mike, et al.,

100% success! I just changed to rtcc_div_8 and viola!

Here is my isr code...

Code:

#int_timer0
/**
 * This method is the timer0 isr
 */
void timer_0_isr(void)
{
    // lets turn off the current LED
    pinIO(PORT_C+currentActiveLED, OFF);

    // go to next LED and display
    currentActiveLED++;
    if(currentActiveLED>=LED_COUNT)
    {
        currentActiveLED=0;
    }

    portIO(PORT_B, LEDValues[currentActiveLED]);    // Set the segments
    pinIO(PORT_C+currentActiveLED, ON);  // turn on digit (using Common Cathode LED's)
}


Thanks for the suggestions

~Kam (^8*
newguy



Joined: 24 Jun 2004
Posts: 1907

View user's profile Send private message

PostPosted: Tue Jan 10, 2006 12:34 pm     Reply with quote
KamPutty wrote:
Do you think you can explain the RTCC_DIV_??? arg. It just has not "clicked" in my brain.


http://www.ccsinfo.com/forum/viewtopic.php?t=22467

That should help explain it.
kam



Joined: 15 Jul 2005
Posts: 59

View user's profile Send private message

KamPutty
PostPosted: Tue Jan 10, 2006 12:59 pm     Reply with quote
Thanks!
MikeValencia



Joined: 04 Aug 2004
Posts: 238
Location: Chicago

View user's profile Send private message Send e-mail Yahoo Messenger

PostPosted: Tue Jan 10, 2006 4:07 pm     Reply with quote
KamPutty wrote:
Mike,

Thanks for the replay,

This is what I currently have in setup:

Code:

    set_timer0(0);
    setup_counters(RTCC_INTERNAL, RTCC_DIV_256 | RTCC_8_BIT);
    enable_interrupts(INT_RTCC);
    enable_interrupts(GLOBAL);


Do you think you can explain the RTCC_DIV_??? arg. It just has not "clicked" in my brain.

~Kam (^8*


Think of it this way:

(4 * X * 256) / Fosc = time between tmr overflow interrupts [seconds]
where X is the post-divider value (e.g. RTCC_DIV_256); the 256 in the 3rd term is if you're using RTCC_8_BIT,

Otherwise it should be
(4 * X * 65536) / Fosc if it's RTCC_16_BIT
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group