CCS :: View topic - SPI PROBLEM IN 18F4550

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

SPI PROBLEM IN 18F4550

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

PIC_INDIAN

Joined: 26 Nov 2005
Posts: 1
Location: India

SPI PROBLEM IN 18F4550
Posted: Sat Nov 26, 2005 11:07 pm

i have problem in setup_spi while using 18F4550, if i setup the spi the spi clock didn't genererated, but while i am using the same code for 18F452 it is working fine, plse tell me what may be the problem Note: eventhough i configured the PORTB as digital IO on reset. Thanks :

PCM programmer

Joined: 06 Sep 2003
Posts: 21708

Posted: Sun Nov 27, 2005 2:30 pm

Reply with quote

Quote:

I have problem in setup_spi while using 18F4550,
if i setup the spi the spi clock didn't genererated

1. Post a small test program that shows the problem.
See my post in the following link. It shows a simple test
program for spi write. Make a similar program for your
PIC, test it, and then post it.
http://www.ccsinfo.com/forum/viewtopic.php?t=24861

2. Also post your compiler version. This will be a number such
as 3.191, or 3.239, etc. You can find it at the top of the .LST
file for you project. It will be in your project folder.

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group