CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
18f452 to 18f4520

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Pota78



Joined: 09 Sep 2005
Posts: 16

View user's profile Send private message

18f452 to 18f4520
PostPosted: Mon Nov 07, 2005 9:42 am     Reply with quote
Hi everyone, probably is a silly question, but I don't know how to solve this problem, I'm getting crazy...
I had a 18f452 and I have ever programmed it with ic-prog and a jdm-compatible programmer...
I have now a 18f4520... ic-prog does not program this device!!! what can I use to program this Pic?
Do you know if there is a schematic for a compatible programmer?

Thank you very much (and sorry for my bad english)
Pota
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Nov 07, 2005 4:38 pm     Reply with quote
Quote:
I have now a 18f4520... ic-prog does not program this device.

This thread here,
http://www.ccsinfo.com/forum/viewtopic.php?t=24576
recommends this programmer software:
http://perso.wanadoo.es/siscobf/winpic800.htm
I have not tried it. Also the page has pop-up ads.
Bart



Joined: 12 Jul 2005
Posts: 49

View user's profile Send private message

PostPosted: Mon Nov 07, 2005 4:45 pm     Reply with quote
I used ic-prog (with the 16F's) also but winpic800 is 3times beter, simply-er and faster.
Using it with a 18F4550 and selve build programmer jdm based.
_________________
I like Skype (www.skype.com), my username is BplotM
Pota78



Joined: 09 Sep 2005
Posts: 16

View user's profile Send private message

PostPosted: Tue Nov 08, 2005 1:50 am     Reply with quote
Thank You very much, I tried to download winpic800 but the file I got is corrupted...
I found WinPicPr and it's very good (much more than ic-prog)... and I can use my jdm self-made programmer Smile

Can you post me a link to a functioning winpic800 installer?
Thank you again, Pota
Pota78



Joined: 09 Sep 2005
Posts: 16

View user's profile Send private message

PostPosted: Tue Nov 08, 2005 1:53 am     Reply with quote
Ok, I downloaded another time the zip file and I was able to open it , thank you very much! Smile
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group