CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
#fuses options definition

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Alvin
Guest
#fuses options definition
PostPosted: Wed Oct 19, 2005 10:41 am     Reply with quote
Hi, can someone help me find descriptions for the options when using #fuses.
for example, what is BORV45?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed Oct 19, 2005 12:56 pm     Reply with quote
Quote:
what is BORV45?

It's CCS's symbolic name for the last Brown-Out voltage setting
in the chart below:
Quote:

bit 3-2 BORV1:BORV0: Brown-out Reset Voltage bits
11 = VBOR set to 2.5V
10 = VBOR set to 2.7V
01 = VBOR set to 4.2V
00 = VBOR set to 4.5V


The following two threads will provide more information:
http://www.ccsinfo.com/forum/viewtopic.php?t=22297
http://www.ccsinfo.com/forum/viewtopic.php?t=24336
Alvin
Guest
#fuses
PostPosted: Fri Oct 21, 2005 12:25 pm     Reply with quote
Thanks for posting the link. It was really helpful. I originally had problems re-flashing a PIC. It was because i used the #fuse NOMCLR. I changed it to #fuse MCLR, that was the fix.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group