CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
board schematic

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ChristophM



Joined: 04 Jul 2005
Posts: 4

View user's profile Send private message

board schematic
PostPosted: Mon Jul 11, 2005 11:28 pm     Reply with quote
Hi
Does anyone have a board schematic with a pic18 and a Ethernet-Controller ENC28J60 or a RTL8019AS (eagle board schematic if possible)??

I need help,
Thanks Christoph
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Tue Jul 12, 2005 6:21 am     Reply with quote
I don't have any in Eage but I have them in PDF. Here is a link to a design using an RTL8019AS

http://www.compsys1.com/support/webdev/webdev.pdf

There should be a Microchip app note for the PICDEM.NET showing about the same thing.


I have a Microchip schematic using the ENC28J60 in PCAD.
MikeValencia



Joined: 04 Aug 2004
Posts: 238
Location: Chicago

View user's profile Send private message Send e-mail Yahoo Messenger

PostPosted: Tue Jul 12, 2005 4:57 pm     Reply with quote
Are samples available yet?

I can't seem to find any.
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Tue Jul 12, 2005 6:02 pm     Reply with quote
Depends on who you know. If you try and sample them from the website, then you probably won't be able to get them just yet. I've had some for quite a while. Since I work for a very big company, I tend to get things very soon because everyone wants to get their "foot in the door".
asmallri



Joined: 12 Aug 2004
Posts: 1634
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Fri Aug 19, 2005 3:56 am     Reply with quote
FYI - I have just started playing with the ENC28J60. It is a lot more power hungry than the Realtek chip. If anyone has an operational implementation I would be interested in knowing if you implemented the output circuitry as per the datasheet or if you have an alternative implementation.
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Fri Aug 19, 2005 4:41 am     Reply with quote
asmallri wrote:
FYI - I have just started playing with the ENC28J60. It is a lot more power hungry than the Realtek chip. If anyone has an operational implementation I would be interested in knowing if you implemented the output circuitry as per the datasheet or if you have an alternative implementation.


I haven't had the time to try mine out yet. I did mine based on a schematic from Microchip. Email me and I'll reply back with the schematic I got from them.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group