CCS asm macro

[boro]

Hi all
Please help ? I have asm program and want use it in CCS program.
Asm code have macro definitions as:
JNB macro FADDR,NBIT,ADDR
BTFSS FADDR,NBIT
GOTO ADDR
endm

CCS assembler failure to understand this macro.
I try to predefine :
#define JNB(FADDR,NBIT,ADDR) {#asm
BTFSS FADDR,NBIT
GOTO ADDR
#endasm
}
but not work.
How predefine macro for work with CCS?
Thank you in advance.

[Ttelmah]

Key thing. If you have line breaks in a #define, they must be 'escaped', with a '\' character, or the define will end at the line break. In your example, your #define, will actually be translated as:

#define JNB(FADDR,NBIT,ADDR) {#asm

Which is not what you want!.
Add the '\' to the end of each line except the last, and see if it works.

Best Wishes

[boro]

ALL RIGHT!

Thank you Ttelmah!