Interupt functions #include!

[picstudent]

Hai
I tried to include my interrrupt function as a seperate file and used # include before main(). Not working.I am using CCS from MPLAB with plug in. Any idea?
Picstudent

[Guest]

Please let us look at your code and tell us more specifically what is not working.

Happy New Year!
Nick

[jds-pic]

also see
http://www.ccsinfo.com/forum/viewtopic.php?t=21424

jds-pic

[picstudent]

Hai
I have timer0 interrupt function written just above the main () function.

like

#int_timer0
inter()
{
............
}

main()
{
........
}

It is working alright. Simulation and target is also Ok.

but Now I have written that timer0 interrupt function in a seperate file
called interupt.c and included
like

#include <interupt.c>

main()
{
.....
}

Now no error during compilation,But on simulation interupt is not reaching that c file
Breakepoints cannot be fixed there on that interupt file also.

hope I am clear now

Picstudent

[kender]

Hi Picstudent,

When I was doing what you have described, my project would not compile. So, to avoid this problem, I would put your ISR (both declaration and code) into an <interrupt.h> file.

Also, take a look at this discussion:
http://www.ccsinfo.com/forum/viewtopic.php?t=21424

Good luck,
Nick[/code]