CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

romote control

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
young



Joined: 24 Jun 2004
Posts: 285

View user's profile Send private message

romote control
PostPosted: Wed Oct 27, 2004 2:12 pm     Reply with quote

I would be very appreciate to know what kinds of transmiter and receiver are popular in PIC application. I am think to developed a system to send data to control a robot from a PIC (A)and then another PIC (B) receive the command to data to do anything according to command. and return some signal back to PIC (A). please list the part number that I could use, if possible, some sample will be much more appreciated.

Thank you.
Trampas



Joined: 04 Sep 2004
Posts: 89
Location: NC

View user's profile Send private message MSN Messenger

PostPosted: Wed Oct 27, 2004 3:39 pm     Reply with quote

Look at the keeLoq chips from Microchip.

Trampas
Guest
Guest







Tx and Rx stuff
PostPosted: Thu Oct 28, 2004 7:20 am     Reply with quote

May not be as sophisticated as the Keeloq devices suggested by a previous post, but you may try looking at some of the rf Rx/Tx components sold by Rentron, for starters. They have some digital AM pairs that are relatively easy to work with and interface to a PIC. They also give datasheets and schematics to get you started. Mated with encoders/decoders, the coding is pretty easy.

Several rf modules are made by Linx. Try Spark Fun as well.

HTH,
BIllT
young



Joined: 24 Jun 2004
Posts: 285

View user's profile Send private message

PostPosted: Wed Nov 17, 2004 7:16 am     Reply with quote

Thank you very much for the infor. I read the artical from this company to get some idea about remote control. these project are for unidirectional communication.

Are there any bidirectional control system or chip, so that I could control a remote system to do something I want, for example to collecting data, and then after collecting data, I can send signal to ask for the remote system to send back the collected data to the main station. this way will need two way communication just as a common RS232 communication?
Guest








Bluetooth
PostPosted: Wed Nov 17, 2004 12:53 pm     Reply with quote

young wrote:
Thank you very much for the infor. I read the artical from this company to get some idea about remote control. these project are for unidirectional communication.

Are there any bidirectional control system or chip, so that I could control a remote system to do something I want, for example to collecting data, and then after collecting data, I can send signal to ask for the remote system to send back the collected data to the main station. this way will need two way communication just as a common RS232 communication?


Bluetooth to Bluetooth will give you full duplex range for class 1 about 100 meters line of sight.
johnl



Joined: 30 Sep 2003
Posts: 120

View user's profile Send private message

PostPosted: Wed Nov 17, 2004 1:23 pm     Reply with quote

Look at Maxstream or Aerocomm transceiver modules. They are wireless bi-directional serial links.
Rocket
Guest







PostPosted: Sun Nov 21, 2004 4:00 pm     Reply with quote

The new Buzz in short range RF comms is the ZigBee spec. The spec is also known as 802.15.4 It is meant to be a cheap alternative to Blue Tooth. Freescale has a chip called MC13192 that is meant to be very neat, and comply with the spec, 2.4Ghs spread spectrum etc.
I am starting a project with this device now. It would be great if a ZigBee stack becomes available for a PIC in CCS.
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Sun Nov 21, 2004 5:07 pm     Reply with quote

Zigbee would be way overkill for something like what he is referring to. Now he could take a look at SMAC that comes free from Freescale for use with 802.15.4
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group