| View previous topic :: View next topic |
| Author |
Message |
Neutone
Joined: 08 Sep 2003
Posts: 839
Location: Houston
|
| Latest ICD software. |
 Posted: Thu Sep 30, 2004 7:42 am |
 |
|
| The new ICD software pops up a warning every time I program a device reminding me that bulk erase and fuse erasing does not work at low voltage. Is there some way to get this idoits message not to pop up every time. I find myself hitting the button to flash the chip only to return later and find it has been waiting for me to admit that I have read the data sheet and know how the chip works. I just don't know what to do. |
|
 |
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Thu Sep 30, 2004 11:03 am |
|
|
| Send an email to Hans. |
|
|
Tom-H-PIC
Joined: 08 Sep 2003
Posts: 105
Location: New Castle, DE
|
|
| Posted: Thu Sep 30, 2004 11:47 am |
|
|
| Yes this is a pain in the neck! |
|
|
Pilot
Joined: 06 Jul 2004
Posts: 9
|
|
| Posted: Thu Sep 30, 2004 1:21 pm |
|
|
| see settings on the upper left corner of the advanced page |
|
|
Tom-H-PIC
Joined: 08 Sep 2003
Posts: 105
Location: New Castle, DE
|
|
| Posted: Thu Sep 30, 2004 1:29 pm |
|
|
Oh that is embarrassing.  Thank You |
|
|
Darren Rook
Joined: 06 Sep 2003
Posts: 287
Location: Milwaukee, WI
|
|
| Posted: Thu Sep 30, 2004 1:34 pm |
|
|
| PCM programmer wrote: | | Send an email to Hans. |
 |
|
|
Neutone
Joined: 08 Sep 2003
Posts: 839
Location: Houston
|
|
| Posted: Thu Sep 30, 2004 3:49 pm |
|
|
| Pilot wrote: | | see settings on the upper left corner of the advanced page |
Thanks. I had not noticed that. |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
