Can not write in internal EEPROM PIC18F252

[gernot]

Can not write in internal EEPROM PIC18F252.
I use this code:
B1=12;
B2=24;
write_EEPROM(adr, B1) ;
write_EEPROM(adr+1, B2) ;
B1=read_EEPROM(adr);
B2=read_EEPROM(adr+1);

... and B1/B2 after read is always 0xFF :-((

Thanks for help.
___________________________
This message was ported from CCS's old forum
Original Post ID: 13063

[PCM programmer]

:=Can not write in internal EEPROM PIC18F252.
:=I use this code:
:=B1=12;
:=B2=24;
:=write_EEPROM(adr, B1) ;
:=write_EEPROM(adr+1, B2) ;
:=B1=read_EEPROM(adr);
:=B2=read_EEPROM(adr+1);
:=
:=... and B1/B2 after read is always 0xFF :-((
:=
------------------------------------------------------------

What's your version of the PCH compiler ?
Here are some lines from the old CCS versions page:

3.092 Some EEPROM write issues are resolved
3.093 Another PIC18 EEPROM issue fixed
3.104 PIC18 PROGRAM_EEPROM read/write fixed/changed -- See readme.txt
___________________________
This message was ported from CCS's old forum
Original Post ID: 13065

[TSchultz]

:=Can not write in internal EEPROM PIC18F252.
:=I use this code:
:=B1=12;
:=B2=24;
:=write_EEPROM(adr, B1) ;
:=write_EEPROM(adr+1, B2) ;
:=B1=read_EEPROM(adr);
:=B2=read_EEPROM(adr+1);
:=
:=... and B1/B2 after read is always 0xFF :-((
:=
:=Thanks for help.

Make sure you have the fuses set correctly to allow writing of the EEPROM. This one caught me when I switched from the PIC16F877 to the PIC18F452. There are many more fuse settings that need to be correct for FLASH and/or EEPROM write, also the WDT is now controlled by fuse settings as well.

-Troy
___________________________
This message was ported from CCS's old forum
Original Post ID: 13078

[gernot]

Thanks for the help :-))
Fuse was the problem.
___________________________
This message was ported from CCS's old forum
Original Post ID: 13079