AD On Off

Bomba · Joined: 09 Dec 2003 Posts: 13

Well I need to shutdown the AD, and later power on. I wrote adcon_bit=0 to shutdown, but when i wrote adcon_bit=1 the devices don`t work again.
What I must to write, I need to initialize the interrupts?. If any body has an example code, is welcome?

Thanks in advance

Haplo · Joined: 06 Sep 2003 Posts: 659 Location: Sydney, Australia

You can use setup_adc(ADC_OFF) to turn the ADC module off, and use the setup_adc() function with proper clock settings again to trun it back on.

Bomba · Joined: 09 Dec 2003 Posts: 13

Thanks you ali.
I found an error in my code, (stupid error).