OT: 40 pin to 28 pin adapter?

[Burt_Poppenga]

Hello,

I currently have a project that is using the 18F452 and I am looking to move to the 18F252.

My current hardware has a 40 PIN DIP socket for the processor. Does anyone make an adapter to go from the 40 pin device to 28 pin device hooking up matching resources (like port a to a, b to b, etc) while ingoring the rest?

I was going to wire something up, but thought I would ask first.

Thanks,
Burt
___________________________
This message was ported from CCS's old forum
Original Post ID: 12390

[Gary Smithson]

You've come to the right place Burt. CCS sells one that does exactly that. They have a few other flavors as well, like the one that converts from 40-pin to the PIC14000. Hope that helps.

Gary Smithson
<a href="http://www.thebytefactory.com" TARGET="_blank">http://www.thebytefactory.com</a>


:=Hello,
:=
:=I currently have a project that is using the 18F452 and I am looking to move to the 18F252.
:=
:=My current hardware has a 40 PIN DIP socket for the processor. Does anyone make an adapter to go from the 40 pin device to 28 pin device hooking up matching resources (like port a to a, b to b, etc) while ingoring the rest?
:=
:=I was going to wire something up, but thought I would ask first.
:=
:=Thanks,
:=Burt
___________________________
This message was ported from CCS's old forum
Original Post ID: 12407

[Gary Smithson]

Allow me to correct myself. The CCS adapters require the 40-pin socket to be ZIF. I failed to notice your mention that you needed to convert a 40-pin DIP socket. Too bad really. Otherwise, it is exactly what you need.

Gary S.


:=You've come to the right place Burt. CCS sells one that does exactly that. They have a few other flavors as well, like the one that converts from 40-pin to the PIC14000. Hope that helps.
:=
:=Gary Smithson
:= <a href="http://www.thebytefactory.com" TARGET="_blank"> <a href="http://www.thebytefactory.com" TARGET="_blank">http://www.thebytefactory.com</a></a>
:=
:=
:=:=Hello,
:=:=
:=:=I currently have a project that is using the 18F452 and I am looking to move to the 18F252.
:=:=
:=:=My current hardware has a 40 PIN DIP socket for the processor. Does anyone make an adapter to go from the 40 pin device to 28 pin device hooking up matching resources (like port a to a, b to b, etc) while ingoring the rest?
:=:=
:=:=I was going to wire something up, but thought I would ask first.
:=:=
:=:=Thanks,
:=:=Burt
___________________________
This message was ported from CCS's old forum
Original Post ID: 12413