CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Software I2C config

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
vtrx



Joined: 11 Oct 2017
Posts: 142

View user's profile Send private message

Software I2C config
PostPosted: Mon Jun 15, 2020 5:53 am     Reply with quote
I will use the PIC18F2550 to communicate with an RTC3231, but I need to use RC0 and RC1 in the communication.
Here is the configuration:

Code:
#define EEPROM_SDA  PIN_C0
#define EEPROM_SCL  PIN_C1

#use i2c (master,sda=EEPROM_SDA,scl=EEPROM_SCL, FAST=400000)


Is this configuration correct?
Ttelmah



Joined: 11 Mar 2010
Posts: 19514

View user's profile Send private message

PostPosted: Mon Jun 15, 2020 6:51 am     Reply with quote
Yes. Provided you are not using an external transceiver for the USB (C1 is
the UOE bit if you do).
vtrx



Joined: 11 Oct 2017
Posts: 142

View user's profile Send private message

PostPosted: Mon Jun 15, 2020 7:15 am     Reply with quote
Thanks for the answer.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group