CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Can i use RS232 in 12f629 by CCS ????

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Can i use RS232 in 12f629 by CCS ????
PostPosted: Tue Feb 03, 2004 7:26 am     Reply with quote
Can i use RS232 in 12f629 by CCS ????
Please example and what pin is RX and TX.
Ttelmah
Guest
Re: Can i use RS232 in 12f629 by CCS ????
PostPosted: Tue Feb 03, 2004 7:57 am     Reply with quote
Anonymous wrote:
Can i use RS232 in 12f629 by CCS ????
Please example and what pin is RX and TX.

You can use _software_ RS232 on any of the pins. The chip does not contain a UART, so there is no hardware RS232 ability. The software approach, is limited (the chip really musn't do anything else when sending or receiving, and the only way to do an 'automatic' receive, without having to poll the pin contnuously, is to use the external 'int' pin for the receive.
Whether this type of RS232 is adequate, will depend on what you need to do.

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group