CCS Rapid USB Prototyping Stick Development Kit

Regular Guy · Joined: 04 Jun 2017 Posts: 110

What is the cable for?

6 ft. 2.5mm Stereo Cable (Non-terminated)

Is there a link for the Exercise Book?

Want to read the book or Getting Started guide while kits are being shipped.

http://www.ccsinfo.com/product_info.php?products_id=rapid_usb

temtronic · Posted: Sat Jan 05, 2019 9:33 am

my guess..

probably the ...

External Connector with Three Conductors for Selectable Functions:
-TTL RS232
-Analog IN
-Analog Out
-PWM
-I2C

Notice it says 'selectable' ! so you'd ONLY get ONE of the functions.....
I downloaded the 'board layout' (upper right of ad...) and it lists /shows which function can be assigned to what cable (white or red), green must be ground. So you can get a choice of 2 functions via the cable.

Jay

Regular Guy · Joined: 04 Jun 2017 Posts: 110

Thank you

Here's the link for the Exercise Book Contents.

http://www.ccsinfo.com/pdfs/TOCs/RapidTOC.pdf

When you get to it it is called 'Quick Guide and Examples Collection'

Guess it is the same thing.

Is there a link for the full Exercise Book?

Ttelmah · Joined: 11 Mar 2010 Posts: 19510

Not been able to find one.
However the examples, will probably be the ones that come with the compiler.
So I'd guess the USB HID scope, serial I/O etc.. However I don't see any
standard example interfacing between USB and I2C, and since they mention
I2C, it's possible they have got a custom example for this.
It's unusual that the manual isn't posted somewhere, but for the moment
I can't see it...

temtronic · Posted: Sun Jan 06, 2019 6:49 am

hmm.. from the linked datasheet...

PIC16F1459 has 8K instructions, 1k RAM and runs at 12 MIPS.

Man that's one POWERFUL PIC ! Original PICs only had 30-35 instructions, easy to learn and remember when assembly was popular.
This PIC has to be better than any PC CPU !

yes, I know it's a 'typo'...
Jay

Regular Guy · Joined: 04 Jun 2017 Posts: 110

Thank you

Guess I have to wait for two kits to get here to read manual.

What is the 'Easy Graphing of any PIC® MCU Data'?

What are '8 Internal I/O Pins (5 Can Be Analog)'?

I hope there is a place to solder on an 8 pin header.

temtronic · Posted: Sun Jan 06, 2019 11:38 am

goto the webpage
click on 'prototype board layout' ( upper right...)
that will download a single page PDF that shows the PCB and I/O config.

As seen in the picture CCS supplies 2 headers for you.
kinda obvious what I/O they're referring to...

Jay