View previous topic :: View next topic |
Author |
Message |
jamalavedra
Joined: 25 Oct 2016 Posts: 62
|
OLED library |
Posted: Wed Oct 26, 2016 10:44 am |
|
|
Hi there!
I am looking for an OLED display (128x64) library which uses an SSD1305 module. I haven't been able to find a working library for my PIC(18F2685).
Does anyone have one?
Do you guys know whether my display will work if I use a code made for an SSD1306?
thanks
![Very Happy](images/smiles/icon_biggrin.gif) |
|
![](templates/subSilver/images/spacer.gif) |
asmboy
Joined: 20 Nov 2007 Posts: 2128 Location: albany ny
|
|
Posted: Wed Oct 26, 2016 10:55 am |
|
|
I'm looking for a "free lunch"
- and respite from posters
who have showed nothing except
a desire to copy other people's code.
i don't expect that to happen either.
you are welcome
![Very Happy](images/smiles/icon_biggrin.gif) |
|
![](templates/subSilver/images/spacer.gif) |
temtronic
Joined: 01 Jul 2010 Posts: 9173 Location: Greensville,Ontario
|
|
Posted: Wed Oct 26, 2016 1:04 pm |
|
|
re:
Quote: | Does anyone have one? |
no, as I don't use that PIC or display
re:
Quote: |
Do you guys know whether my display will work if I use a code made for an SSD1306? |
Possibly, even probably, though I'd have to download the datasheets for both the 1305 and the 1306,scan maybe 10-13 pages and make an educated conclusion. However since my HC-12s just arrived, I've got MY toys to play with...
My 'gut' instinct says, yup, it'll work, but won't know 100% until I read the datasheets. Sorry, haven't the time, those HC-12s keep looking at me!
I miss the 'old school days' when we had dataBOOKS handed out by the mfrs and distis, read 1000's of pages to see how to make the 'new' 1602 UART work (eliminates 14 TTL chips !), the COSMAC 1802 (1st CMOS micro), and others....
sigh...
Jay |
|
![](templates/subSilver/images/spacer.gif) |
Ttelmah
Joined: 11 Mar 2010 Posts: 19366
|
|
Posted: Wed Oct 26, 2016 1:23 pm |
|
|
Several changes would be needed, and a lot depends on the actual display.
First the I2C addresses it uses are different.
Then the 1305, supports displays with more levels. Up to 4* the RAM of the 1306 (it can be used with some colour displays). Too much RAM for most PIC's given the standard problem with these controllers that the RAM cannot be read, so the host processor has to carry a copy of what is on the display. On a mono display it might be OK, but will need different configuration values. This will depend on the actual display involved. |
|
![](templates/subSilver/images/spacer.gif) |
|